Changed install instructions

README.md

@@ -1,7 +1,7 @@
-picoReflow
+Kiln-Controller
 ==========
 
-Turns a Raspberry Pi into a cheap, universal & web-enabled Reflow Oven Controller.
+Turns a Raspberry Pi into a cheap, universal & web-enabled kiln controller.
 Of course, since it is basically just a robot sensing temperature and controlling
 environmental agitators (heating/cooling) you can use it as inspiration / basis
 when you're in need of a PID based temperature controller for your project.
@@ -23,48 +23,18 @@ Don't forget to share and drop a link, when you do :)
 
 ## Installation
 
-### Dependencies
+#### Ubuntu/Raspbian libraries
 
-We've tried to keep external dependencies to a minimum to make it easily
-deployable on any flavor of open-source operating system. If you deploy it
-successfully on any other OS, please update this:
+    $ sudo apt-get install python-pip python-dev libevent-dev python-virtualenv
 
-#### Currently tested versions
+### Quick Start for all linux environments
 
-  * greenlet-0.4.2
-  * bottle-0.12.4
-  * gevent-1.0
-  * gevent-websocket-0.9.3
-
-#### Ubuntu/Raspbian
-
-    $ sudo apt-get install python-pip python-dev libevent-dev
-    $ sudo pip install ez-setup
-    $ sudo pip install greenlet bottle gevent gevent-websocket
-
-#### Gentoo
-
-    $ emerge -av dev-libs/libevent dev-python/pip
-    $ pip install ez-setup
-    $ pip install greenlet bottle gevent gevent-websocket
-
-#### Raspberry PI deployment
-
-If you want to deploy the code on a PI for production:
-
-    $ pip install RPi.GPIO
-
-This **only applies to non-Raspbian installations**, since Raspbian ships
-RPi.GPIO with the default installation.
-
-If you also want to use the in-kernel SPI drivers with a MAX31855 sensor:
-
-    $ sudo pip install Adafruit-MAX31855
-
-### Clone repo
-
-    $ git clone https://github.com/apollo-ng/picoReflow.git
-    $ cd picoReflow
+    $ git clone https://github.com/jbruce12000/kiln-controller.git 
+    $ cd kiln-controller
+    $ virtualenv venv
+    $ source venv/bin/activate
+    $ pip install -r requirements.txt
+    $ ./kiln-controller.py
 
 ## Configuration
 
@@ -72,11 +42,6 @@ All parameters are defined in config.py, just copy the example and review/change
 
     $ cp config.py.EXAMPLE config.py
 
-## Usage
-
-### Server Startup
-
-    $ ./picoReflowd.py
 
 ### Autostart Server onBoot
 If you want the server to autostart on boot, run the following commands
@@ -105,8 +70,3 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-## Support & Contact
-
-Please use the issue tracker for project related issues.
-
-More info: https://apollo.open-resource.org/mission:resources:picoreflow