PolyCraft/kiln-controller
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

- adding some params that are not used yet

Browse Source
This commit is contained in:
jbruce 2018-11-27 13:33:11 -05:00
parent 6986c29de0
commit 089daf36f5
1 changed files with 14 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
config.py
View File

@ -80,3 +80,17 @@ temp_scale = "f" # c = Celsius | f = Fahrenheit - Unit to display
time_scale_slope = "h" # s = Seconds | m = Minutes | h = Hours - Slope displayed in temp_scale per time_scale_slope
time_scale_profile = "m" # s = Seconds | m = Minutes | h = Hours - Enter and view target time in time_scale_profile
# not used yet
# if measured value is N degrees below set point
warning_temp_low = 5
# not used yet
# if measured value is N degrees above set point
warning_temp_high = 5
# not used yet
# emergency shutoff the kiln if this temp is reached.
# when solid state relays fail, they usually fail closed. this means your
# kiln receives full power until your house burns down.
# this should not replace you watching your kiln or use of a kiln-sitter
emergency_shutoff_temp = 155