PolyCraft/kiln-controller
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

make config work on linux

Browse Source
This commit is contained in:
jbruce 2022-11-09 13:09:01 -05:00
parent a76f9e19be
commit 22b663f648
1 changed files with 9 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
config.py
View File

@ -3,11 +3,6 @@ import os
from digitalio import DigitalInOut
import busio
try:
import board
except NotImplementedError:
print("not running on blinka recognized board, probably a simulation")
########################################################################
#
# General options
@ -52,12 +47,15 @@ currency_type = "$" # Currency Symbol to show when calculating cost to run j
# To control the kiln, one gpio pin is used as an output. Pick any
# you like. I chose gpio pin 23. This output is used to control a
# zero-cross solid-state-relay.
spi_sclk = board.D11 #spi clock
spi_mosi = board.D10 #spi Microcomputer Out Serial In (not connected)
spi_miso = board.D9 #spi Microcomputer In Serial Out
spi_cs = board.D5 #spi Chip Select
gpio_heat = board.D23 #output that controls relay
try:
import board
spi_sclk = board.D11 #spi clock
spi_mosi = board.D10 #spi Microcomputer Out Serial In (not connected)
spi_miso = board.D9 #spi Microcomputer In Serial Out
spi_cs = board.D5 #spi Chip Select
gpio_heat = board.D23 #output that controls relay
except NotImplementedError:
print("not running on blinka recognized board, probably a simulation")
### Thermocouple Adapter selection:
# max31855 - bitbang SPI interface