blinka supported boards

docs/supported-boards.md

@@ -0,0 +1,72 @@
+This is a list of all the boards that have SPI support in blinka. Any of
+these could be used to control the kiln for this project. I have experience
+only with Raspberry PI.
+
+- bananapi/bpim2plus.py
+- bananapi/bpim2zero.py
+- bananapi/bpim5.py
+- beagleboard/beaglebone_ai.py
+- beagleboard/beaglebone_black.py
+- beagleboard/beaglebone_pocketbeagle.py
+- beagleboard/beaglev_starlight.py
+- binho_nova.py
+- clockworkcpi3.py
+- coral_dev_board_mini.py
+- coral_dev_board.py
+- dragonboard_410c.py
+- feather_huzzah.py
+- feather_u2if.py
+- ftdi_ft2232h.py
+- ftdi_ft232h.py
+- giantboard.py
+- greatfet_one.py
+- hardkernel/odroidc2.py
+- hardkernel/odroidc4.py
+- hardkernel/odroidn2.py
+- hardkernel/odroidxu4.py
+- hifive_unleashed.py
+- itsybitsy_u2if.py
+- khadas/khadasvim3.py
+- librecomputer/aml_s905x_cc_v1.py
+- lubancat/lubancat_imx6ull.py
+- macropad_u2if.py
+- nanopi/duo2.py
+- nanopi/neoair.py
+- nanopi/neo.py
+- nodemcu.py
+- nvidia/clara_agx_xavier.py
+- nvidia/jetson_nano.py
+- nvidia/jetson_nx.py
+- nvidia/jetson_orin.py
+- nvidia/jetson_tx1.py
+- nvidia/jetson_tx2_nx.py
+- nvidia/jetson_tx2.py
+- nvidia/jetson_xavier.py
+- onion/omega2.py
+- orangepi/orangepi3.py
+- orangepi/orangepi4.py
+- orangepi/orangepipc.py
+- orangepi/orangepir1.py
+- orangepi/orangepizero2.py
+- orangepi/orangepizeroplus2h5.py
+- orangepi/orangepizeroplus.py
+- orangepi/orangepizero.py
+- pico_u2if.py
+- pine64.py
+- pineH64.py
+- qtpy_u2if.py
+- radxa/radxazero.py
+- radxa/rockpi4.py
+- radxa/rockpie.py
+- radxa/rockpis.py
+- raspberrypi/raspi_1b_rev1.py
+- raspberrypi/raspi_1b_rev2.py
+- raspberrypi/raspi_40pin.py
+- raspberrypi/raspi_4b.py
+- raspberrypi/raspi_cm.py
+- siemens/siemens_iot2050.py
+- soPine.py
+- stm32/osd32mp1_brk.py
+- stm32/osd32mp1_red.py
+- stm32/stm32mp157c_dk2.py
+- tritium-h3.py