From 9c3cf48e5cf5f12242d608070f8b650bb9ae7ea4 Mon Sep 17 00:00:00 2001 From: jbruce Date: Fri, 4 Nov 2022 05:40:03 -0900 Subject: [PATCH] smooth the bumps --- docs/ziegler_tuning.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/ziegler_tuning.md b/docs/ziegler_tuning.md index fba9d23..ea1cf30 100644 --- a/docs/ziegler_tuning.md +++ b/docs/ziegler_tuning.md @@ -6,11 +6,11 @@ The method implemented here is taken from ["Ziegler–Nichols Tuning Method"](ht One issue with Ziegler Nicols is that is a **heuristic**: it generally works quite well, but it might not be the optimal values. Further manual adjustment may be necessary. -## Step 1: Record Temperature Profie +## Step 1: Run the Auto-Tuner -Make sure the kiln-controller is **stopped**. Make sure your kiln is in the same state it will be in during a normal firing. For instance, if you use a kiln vent during normal firing, make sure it is on. Make sure your kiln is completely cool - we need to record the data starting from room temperature to correctly measure the effect of kiln/heating. - -execute the code to record data and provide estimates at the end: + - make sure the kiln-controller is **stopped** + - make sure your kiln is in the same state it will be in during a normal firing. For instance, if you use a kiln vent during normal firing, make sure it is on. + - make sure the kiln is completely cool. We need to record the data starting from room temperature to correctly measure the effect of kiln/heating. ``` source venv/bin/activate; ./kiln-tuner.py