07dbae9398
Add name of profile so secondary displays can work
2021-04-08 23:51:49 +01:00
eb4c212471
- show better estimation of time kiln elements are being heated
...
in web client
2021-03-29 19:22:35 -04:00
a3243097c7
- big change to PID class. It was not properly handling the integral.
...
Essentially it was never large enough to impact the loop. The integral
has been inverted so if you want more integral, define it as a smaller
number.
- added a comment to the config about changing the temp scale
2021-03-24 08:32:06 -04:00
2831c3094a
- schedule shifting when cooling too slowly added
...
- increase window size where PID control takes effect
- average thermocouple readings instead of taking max
2021-03-20 22:09:44 -04:00
b524360443
- another comment for a feature to fix
2021-03-17 20:14:00 -04:00
a27acbace5
- comments for future work
2021-03-17 20:05:38 -04:00
8603138e66
- fixing bugs with real hardware
2021-03-14 15:45:24 -04:00
c5b7f21044
- complete rewrite of oven class
...
- simulation more accurate
- added kiln_must_catch_up functionality
- added max31856 support
2021-03-14 15:16:03 -04:00
bac1a2d789
Remove space in print statements
2020-12-22 15:31:06 +01:00
084d302b43
Prevent CPU overload on idle condition
2020-12-22 15:29:11 +01:00
9de2db739a
Remove trailing whitespace
2020-12-22 15:27:55 +01:00
217482b10c
- adding a smoker service that restarts a specific schedule if the power goes out
2020-03-18 04:31:37 -09:00
8046d9c214
- bug with skipping data, index must be an int
2019-04-24 22:33:00 -04:00
3718d0952a
- first stab at getting code python3 compliant
2019-04-18 11:44:54 -04:00
edea921d88
- never used spi, so fixing some leftovers for an issue
2019-03-03 18:24:52 -05:00
e72cbe0b6c
- implemented thermocouple_offset
2019-02-27 21:33:10 -05:00
6e2ac3c05b
- more filtering
2018-12-23 13:13:38 -05:00
85dad99945
- filtering still
2018-12-23 13:03:40 -05:00
ed2445be4f
- trying more filtering
2018-12-23 12:46:22 -05:00
4b7d30754a
- more filtering
2018-12-23 12:37:49 -05:00
3a89a6149f
- trying to filter thermocouple noise in software
2018-12-23 12:14:08 -05:00
5e5abe5b32
- add startat parameter to profile runs to allow for restarting at any point in a run. handle power outages, accidently hitting stop button etc.
2018-12-21 15:13:12 -05:00
d8d389d3c7
- must import math module
2018-12-06 18:00:03 -05:00
505e2c0aca
- remove door and cool from gpio init
2018-12-01 19:54:29 -05:00
871f5fe65e
- added another FIXME to move the FIXMEs to the Oven class
2018-11-30 15:27:10 -05:00
e25a37c867
- adding some FIXME ideas for later implementation
2018-11-29 11:21:33 -05:00
9641cf2b7c
- last_log historical data was too big for long runs. made it always about the same size regarless of schedule length
2018-11-29 10:14:37 -05:00
ef5cb6d49d
- adding logging for completion
2018-11-27 16:10:36 -05:00
b87deab01c
- added shut down temp if it's exceeded, kiln shuts down
2018-11-27 13:49:46 -05:00
6986c29de0
- removed some commented out code. added some ideas about what I might do in the future.
2018-11-27 11:42:34 -05:00
624ae9e739
adding systemd service script and a script to install it as a service that runs during startup
2018-11-26 21:15:24 -05:00
e8bf698212
fix init script to work with virtualenv
2018-11-26 20:36:32 -05:00
46b0e659df
- mv'ed init.d script to kiln-controller
2018-11-26 19:49:25 -05:00
2e88f30cf6
- add NIST-linearized thermocouple conversion for accurate thermocouple readings
2018-11-26 12:57:36 -05:00
3c04761bd0
- changing logging for seconds to integers
2018-11-23 18:16:49 -05:00
9d5beab15f
- changed hazard led temp to 1300
...
- removed old logging code in oven.py
2018-11-23 18:04:56 -05:00
37a58818bb
- changed the logging to record heat on/off times plus time left
2018-11-22 13:41:29 -05:00
3cc7c4a11b
- changed time step to one sec in config
...
- added sleep for simulations to accurately reflect a real run
2018-11-22 09:48:22 -05:00
46ff62c9b8
- removing most of the air and cool stuff
2018-11-21 15:18:25 -05:00
3c1f0848af
- commented out a check so sim would run
...
- made force param always on so saves of schedule changes work as expected
2018-11-21 11:35:28 -05:00
377e27e9da
Update oven.py
2018-06-09 16:22:40 -07:00
35eb7d3346
Update oven.py
...
Added proportional output funtionality by turning the oven (SSR) on for a portion of the time_step determined by the pid loop output. So, if time_step = 1, and the pid loop is calling for .3 heat, the SSR will be on for .3 seconds, and off for .7 seconds. I did this by adding an additional sleep. Previously, the SSR would be on whenever pid > 0.
2018-06-09 13:42:55 -07:00
de0d3baadb
add a note about GPIO collisions with system SPI
2017-12-01 18:59:07 -06:00
9874aeb1d8
another stupid oops
2017-11-30 20:05:16 -06:00
40bb54e521
be a little 'softer' with errors
2017-11-30 19:09:29 -06:00
e95a61fe3e
fix a bug or two
2017-11-30 18:58:47 -06:00
87778d8c2b
support for kernel spi (not bitbang) MAX38155 interface
2017-11-30 18:48:39 -06:00
9ca2842b0e
unary operation made safe in error handler for Thermocouple
...
unary & is used with 32 bits operands. If the operand literal is not
explicitly expressed as 32bits, it can create random casting errors
depending on the Python version and the underlying implementation.
2017-09-15 15:58:29 -04:00
c31a1af8a1
add init script so we can make the picoReflow server autostart on boot, just run the commands (see readme) and it should start on boot
2016-09-03 16:34:36 +02:00
43ed42245e
Add time and temperature options
2016-07-07 23:41:06 -05:00
Andrew de Quincey
Jason Bruce
Ryan J. Dillon
benkrasnow
Andrew Malota
Tom
I.C.E.C
Andy Rawson