This commit adds the profile tab to the experimental user menu. We're adding it to the user menu because it contains links/buttons that are not available anywhere else. We may remove the tab again if we find better places for those links/buttons, but for now it'll stay.
For more context on the experimental user menu, see https://github.com/discourse/discourse/pull/17379.
The following changes are made in this commit:
1. Move caret icon in sidebar section header to the right.
1. Each row in sidebar takes the full width which enables us to do a
full width highlight on hover and when sidebar link is active.
1. Ensure each row in Sidebar is of the same height.
Internal refs: /t/70546, /t/72196, /t/71820
Instead of relying on another help to generate the icons, we want to
rely on the interface for adding prefix icons. This ensures that prefix
icons are consistent across the section links in Sidebar
Before this commit, we carried custom code and styles for the sidebar on
mobile. This meant the look and feel of bringing up the sidebar on
mobile was very different from the user menu resulting in a very
inconsistent experience on mobile. Also, we could not leverage on the
existing swipe to close support on mobile.
In this commit, we made it such that the sidebar dropdown is always
rendered on mobile and made the interaction with the dropdown more
consistent with the user menu. There is also more parity with the old
hamburger dropdown when the experimental sidebar is disabled.
Previously, this would require manually adding `?safe_mode=...` multiple times during the email-based login flow. `/u/admin-login` is often used when debugging a site, so it makes sense for this to be easier.
This commit introduces a new checkbox on the `/u/admin-login` screen. When checked, it'll set the safe_mode parameter on the `/email-login` link, and then pass it all the way through to the homepage redirect.
At a certain point, the cost of debugging a flaky acceptance test is
just too high for what we're testing for here. I've decided to just
accept the risk of a minor UX feature.
Follow-up to 55fa94f759
Previously, PM only tags were being routed to the public topic list with
the tag added as a filter. However, the public topic list does not fetch
PMs and hence PM only tags did not provide any value when added to the
Sidebar. This commit changes that by allowing the client to
differentiate PM only tag and thus routes the link to the PM tags show
route.
Counts for PM only tags section links are not supported as of this
commit and will be added in a follow up commit.
A public key must be added to GitHub when installing private themes.
When the process happens asynchronously (for example if the admin does
not have admin permissions to the GitHub repository), installing
private themes becomes very difficult.
In this case, the Discourse admin can partially install the theme by
letting Discourse save the private key, create a placeholder theme and
give the admin a public key to be used as a deploy key. After the key
is installed, the admin can finish theme installation by pressing a
button on the theme page.
Some of the changes in this PR are extracted from https://github.com/discourse/discourse/pull/17379.
Similar to the bookmarks tab in the new user menu, the messages tab also displays a mix of notifications and messages. When there are unread message notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with a list of the user's messages. The bubble/badge count on the messages tab indicates how many unread message notifications there are.
* FEATURE: update bootstrap mode notice to add invite and wizard links
* Updates per feedback on PR
* Fix the wizard link not showing
* Remove unneeded function
* Remove router service injection
Some of the changes in this commit are extracted from https://github.com/discourse/discourse/pull/17379.
The bookmarks tab in the new user menu is different from the other tabs in that it can display a mixture of notifications and bookmarks. When there are unread bookmark reminder notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with the rest of the bookmarks. The bubble/badge count on the bookmarks tab indicates how many unread bookmark reminder notifications there are.
On the technical aspect, since this commit introduces a new `bookmark-item` component, we've done some refactoring so that all 3 "item" components (`notification-item`, `reviewable-item` and the new `bookmark-item`) inherit from a base component and get identical HTML structure so they all look consistent.
Internal tickets: t70584 and t65045.
Currently we can’t add a case-sensitive watched word if another one
exists with a different case. For example, the existing watched word
`Meta` has been created and is case-sensitive. Now an admin tries to add
`metA` while marking it as case-sensitive too, this won’t work and the
word won’t be added.
This patch changes this behavior by allowing to add same words that have
different cases, so the example above will now work as expected.
We still check for uniqueness but case-sensitivy is now taken
into account. It means that if the watched word `meta` already exists
and is not case-sensitive then it will not be possible to add `Meta`
(case-sensitive or not) as `meta` already matches every possible
variations of this word.
This will allow consumers to inject it using `topicTrackingState: service()` in preparation for the removal of implicit injections in Ember 4.0. `topic-tracking-state:main` is still available and will print a deprecation notice.
Ideally we would convert topic-tracking-state into a true service, rather than registering a model instance into the registry. However, inter-dependencies between service injections make this very difficult to achieve. We don't want to block Glimmer Component work, so this commit does the minimum for now.
When the route of the link is equal to the active route, we promote it
out of the "more..." links drawer and display it directly under the
community section. This commit fixes a bug where the secondary links in
the "more..." links drawer was not being marked as active.
Follow-up to e09fd7cde2
This commit extends the existing API bridge for supporting custom
general links in the old hamburger menu in Sidebar to support custom
footer links. Custom footer links can be added to the old hamburger
menu via the `api.decorateWidget("hamburger-menu:footerLinks")` API.
Footer links are added into the secondary section of the "More..." links
drawer in the Community section of the sidebar.
In the current hamburger menu dropdown, we have a link which allows users to toggle between mobile and desktop view on mobile and touch devices. This commit brings the same behaviour to sidebar.
Now that we have a "more..." links drawer, we can move some of the links
in footer into the links drawer. The footer itself does not have much
horizontal or vertical space for us to work with and hence limits the
amount of links which we can add to it.
Before this commit, links with routes that require multiple models were
incorrectly displayed as the active link in the
Sidebar::MoreSectionLinks component because we were only checking if the
routeName was active.
* FEATURE: Add case-sensitivity flag to watched_words
Currently, all watched words are matched case-insensitively. This flag
allows a watched word to be flagged for case-sensitive matching.
To allow allow for backwards compatibility the flag is set to false by
default.
* FEATURE: Support case-sensitive creation of Watched Words via API
Extend admin creation and upload of Watched Words to support case
sensitive flag. This lays the ground work for supporting
case-insensitive matching of Watched Words.
Support for an extra column has also been introduced for the Watched
Words upload CSV file. The new column structure is as follows:
word,replacement,case_sentive
* FEATURE: Enable case-sensitive matching of Watched Words
WordWatcher's word_matcher_regexp now returns a list of regular
expressions instead of one case-insensitive regular expression.
With the ability to flag a Watched Word as case-sensitive, an action
can have words of both sensitivities.This makes the use of the global
Regexp::IGNORECASE flag added to all words problematic.
To get around platform limitations around the use of subexpression level
switches/flags, a list of regular expressions is returned instead, one for each
case sensitivity.
Word matching has also been updated to use this list of regular expressions
instead of one.
* FEATURE: Use case-sensitive regular expressions for Watched Words
Update Watched Words regular expressions matching and processing to handle
the extra metadata which comes along with the introduction of
case-sensitive Watched Words.
This allows case-sensitive Watched Words to matched as such.
* DEV: Simplify type casting of case-sensitive flag from uploads
Use builtin semantics instead of a custom method for converting
string case flags in uploaded Watched Words to boolean.
* UX: Add case-sensitivity details to Admin Watched Words UI
Update Watched Word form to include a toggle for case-sensitivity.
This also adds support for, case-sensitive testing and matching of Watched Word
in the admin UI.
* DEV: Code improvements from review feedback
- Extract watched word regex creation out to a utility function
- Make JS array presence check more explicit and readable
* DEV: Extract Watched Word regex creation to utility function
Clean-up work from review feedback. Reduce code duplication.
* DEV: Rename word_matcher_regexp to word_matcher_regexp_list
Since a list is returned now instead of a single regular expression,
change `word_matcher_regexp` to `word_matcher_regexp_list` to better communicate
this change.
* DEV: Incorporate WordWatcher updates from upstream
Resolve conflicts and ensure apply_to_text does not remove non-word characters in matches
that aren't at the beginning of the line.
In the old `decorateWidget("hamburger-menu:generalLinks", callbackFn)`
API, the return value of the callback function can either return a
`route` or `href`. The API bridge added in
de54bdd73d supported `route` but not `href` and
hence the need for this commit.
