The current implementation ties the filter query params tightly to the
`summary` attribute on the post stream model making it hard to support
other filters.
Meta topic: https://meta.discourse.org/t/rtl-direction-is-broken-in-quotes/217639?u=osama.
Posts in Discourse are by default always rendered in the same direction as the rest of site, for example if the site is RTL, a post in that site is always rendered RTL even if it's made of an LTR language entirely. However, this behavior can be changed by enabling the `support mixed text direction` site setting which makes our posts rendering engine consider each "paragraph" in the post and apply an appropriate direction (using the `dir` attribute) on it based on its content/language.
I put paragraph in quotes because technically we only loop through the immediate children of the HTML element that contains the post cooked HTML and do this direction check on them. Most of the time the immediate children are actually paragraphs, but not always. The direction of an element is determined by checking its `textContent` property against a regular expression that checks all characters are RTL characters and based on the regular expression result the `dir` attribute is set on the element.
This technique doesn't work so well on quotes because they may contain multiple paragraphs which may be in different languages/directions. For example: if a site's language is Arabic (RTL language) and the `support mixed text direction` setting is enabled, regular paragraphs outside quotes are rendered as expected with the right direction depending on the paragraph's language. However, paragraphs within a quote are all (incorrectly) rendered in a single direction, LTR or RTL, regardless of whether they're of different languages/directions or not.
The reason for this is that when we're determining the direction for the quote, it's considered as one element and the direction is set on the whole quote. But for complex quotes that contain mixed paragraphs, we need to be more surgical and apply direction on individual paragraphs/elements within the quote.
This commit adds special handling for quotes to ensure that:
* the quote top bar (the avatar plus the chevron and arrow) always match the site direction
* each immediate paragraph (`<p>` elements) under `<blockquote>` in the quote gets a direction based on its content.
For before/after screenshots, see PR #16004.
Previously we were publishing one messagebus message per user which was 'tracking' a topic. On large sites, this can easily be 1000+ messages. The important information in the message is common between all users, so we can manage with a single message on a shared channel, which will be much more efficient.
For user-specific values (notification_level and last_read_post_number), the JS app can infer values which are 'good enough'. Correct values will be loaded as soon as a topic-list containing the topic is visited.
When parent category or grandparent category is muted, then category should be muted as well.
Still, it can be overridden by setting individual subcategory notification level.
CategoryUser record is not created, mute for subcategories is purely virtual.
Instead of relaying on /timings request, we should cache last read post number. That should protect from having incorrect unread counter when going back to topic list.
This additional cache is very temporary as once /timings request is finished, serializer will have a correct result.
Simplified flow is:
1. Store in cache information about last seen post number before /timings request is sent
2. When getting back to topic list compare value of last seen post number returned by /latest request and information in cache. If cache number is higher, than use it instead of information returned by /latest. In addition delete cache item as there is high chance that `/timings` request already finished.
3. Optionally, delete cache when timings request is done and topic list was not yet visited.
Keeping cache reasonably small should not affect performance.
TopicTrackingState should correctly set filterCategory and filterTag for all different configurations.
When filterTag exists and new_topic message arrives, it ensures that filterTag is included in payload tags
If filterTag is part of payload tags, message that new topics are available is displayed and after click, new topics are included in the list.
Allows to write custom code blocks:
```
```mermaid height=200,foo=bar
test
```
```
Which will then get converted to:
```
<pre data-code-wrap="mermaid" data-code-height="200" data-code-foo="bar">
<code class="lang-nohighlight">
test
</code>
</pre>
```
In the commit d8bf2810ff we hoisted
the userOptionFields array to a module-level variable, but kept
the code inside save() the same. This causes an issue where if
save() is called twice on the same user with some array of user
option fields, the userOptionFields array is mutated, which means
the second save is likely not saving the fields intended.
This commit fixes the issue by not mutating the array. We cannot
change them into consts though, because we have an API to add more
items to the array.
* Some are no longer flaky or easily fixed
* Some are out of date or test things we can't do accurately (scroll
position) and are removed.
* Unwinds some uppy tests and makes sure all promises and runloops are
resolved.
Everything has been run in legacy/ember cli multiple times to ensure no
obvious suite regressions.
* The current evaluation of uppy promises is causing the entire suite to fail
if there's an exception. Instead of using `done` we use the simpler
pattern of returning the promise from the test to force Qunit to wait
until it's completed.
* In some browser conditions `/last.json` will be requested depending on the
particular scroll / performance. This causes the tests not to fail if
that is the case.
* Keyboard shortcuts were not being fully cleared between runs,
resulting in tests failures.
This means that our DiscourseURL logic will work consistently in tests, where `window.location` doesn't get updated.
To make it work properly, our `replaceState` implementation needed to be updated so that it writes the new URL to Ember's router, rather than bypassing the router and going straight to the `location` API.
A couple of tests needed updating following this fix:
- the composer-test was asserting that the new reply should be missing from the DOM... when really it **should** be in the DOM, and this fix to the test environment makes it so
- the topic-test was making a fake topic fixture based on the data from a topic with a different id. This was causing the topic route to get confused, and 'fix' the currentURL. This commit updates it to use a fixture with consistent data.
This commit also removes the feature detection of `window.history`. It's feature-detected within `discourse-location`. Plus, we don't support any browsers without it.
Previously only `<div>one top element</div>` was allowed because we use `firstChild` instead of `children`.
We also want `<div>one</div><div>two</div>` to work with this method.
This commit extends the options which can be passed to
`PrettyText.markdown` so that which Markdown-it rules and Discourse
Markdown plugins to be used when rendering a text can be customizable.
Currently, this extension is mainly used by plugins.
It was impossible to select the 'all' filter for categories that have
the default list filter set to 'no subcategories'. This happens because
'/all' was not appended to the URL and in the absence of any list filter
('all' or 'none'), the default list filter ('none') was automatically
selected.
Discourse sent only translation overrides for the current language to the client instead of sending overrides from fallback locales as well. This especially impacted en_GB -> en since most overrides would be done in English instead of English (UK).
This also adds lots of tests for previously untested code.
There's a small caveat: The client currently doesn't handle fallback locales for MessageFormat strings. That is why overrides for those strings always have a higher priority than regular translations. So, as an example, the lookup order for MessageFormat strings in German is:
1. override for de
2. override for en
3. value from de
4. value from en
The commit 20b2a42f49 broke
upload handlers, because previously we passed through the
native File object to the handler, not the uppy-wrapped
File object.
* DEV: Improve PresenceChannel state storage
Replaces some objects with Maps, and removes the redundant _presentChannels Set.
* DEV: Automatically leave PresenceChannels when in the background
If a tab has been in the background for 10s, or there has been no user activity for 60s, then the user will be removed from all PresenceChannels until activity resumes. Developers can opt-out of this by passing `{onlyWhileActive: false}` to the `enter` method.
The leak was introduced in #11722 and a test was added that relied on it in #14563
This PR fixes the leak (bookmarks-test), fixes the test that relied on it (fast-edit-test), and repleces some ad-hoc code with cloneJSON helper (other files)
Currently when a user creates posts that are moderated (for whatever
reason), a popup is displayed saying the post needs approval and the
total number of the user’s pending posts. But then this piece of
information is kind of lost and there is nowhere for the user to know
what are their pending posts or how many there are.
This patch solves this issue by adding a new “Pending” section to the
user’s activity page when there are some pending posts to display. When
there are none, then the “Pending” section isn’t displayed at all.
Time spent in the 'find module with suffix' portion of our `customResolve` function were adding up to around 100ms-150ms when booting the app. This time is spread over 150+ calls, so it's not immediately obvious in flamegraphs.
This commit implements a (reversed) [Trie](https://en.wikipedia.org/wiki/Trie) which enables fast suffix-based lookups on a list of strings.
In my tests, this requires < 5ms to initialize, and brings the cumulative 'find module with suffix' time down to `< 5ms`. This corresponds to a ~100ms improvement in LCP metrics in my browser.
The only behavior change is to remove support for module filenames which are **not** dasherized. I haven't found any core/theme/plugin modules which are not dasherized in their filenames.
