If we don't escape periods, they are interpreted as wildcards and it
becomes impossible to visit profiles of other users whose usernames
match. E.g., if your username was `a.c` and attempted to visit `abc`'s
profile, you would be incorrectly redirected to your own profile.
After editing a post, it is refreshed by two ways. One of them is
triggered by the client side which will route the client to the edited
post and force a reload this way. The other way is via Message Bus.
This commit ignores both of the ways and tries to update the post
immediately and then refresh the post stream.
When the client received a new notification, it prioritized only PM
notifications instead of maintaining the priority order. Later, the
check for missing notification deleted all notifications that were
in the wrong order because it could not match the IDs.
The correct order puts high_priority AND unread notifications first.
Low priority or read notifications (including high priority, but read
notifications) come after.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
There are two methods which the server uses to verify an invite is being redeemed with a matching email:
1) The email token, supplied via a `?t=` parameter
2) The validity of the email, as provided by the auth provider
Only one of these needs to be true for the invite to be redeemed successfully on the server. The frontend logic was previously only checking (2). This commit updates the frontend logic to match the server.
This commit does not affect the invite redemption logic. It only affects the 'show' endpoint, and the UI.
The previous commits removed reviewables leading to a bad user
experience. This commit updates the status, replaces actions with a
message and greys out the reviewable.
When slow mode is enabled it's possible to open the slow mode dialog again to disable it or to update slow mode settings. The problem is that in this case, the button for saving still has the label "Enable" which is confusing.
This changes the text on the button from "Enable" to "Update" when slow mode is already enabled.
If reload a page after enabling slow mode and open the slow mode dialog again it would show a slow mode interval but wouldn't show Enabled Until value. This PR fixes it.
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
* FIX: Cache missing inline oneboxes
Some inline oneboxes were not cached when the server did not return an
answer for an URL and the queried URL and the absolute URL were
different.
For example, if user typed www.example.com, the client asked the server
for http://www.example.com and if the server returned an empty response,
then the client would keep requesting an inline onebox everytime the
composer changed.
In other words, the key used for reading (the absolute URL) and the one
used for writing (the URL as typed by the user) were not the same when
the server returned an empty response.
* DEV: Check cache before making request
There is another cache check in PrettyText, but that is not enough if
multiple requests are pending. This problem was made obvious in tests,
but can happen for users with slow connections.
Fixes a bug in user preferences > interface, the light scheme dropdown
was defaulting to "Theme Default" even when the user had selected a
different scheme.
The old share modal used to host both share and invite functionality,
under two tabs. The new "Share Topic" modal can be used only for
sharing, but has a link to the invite modal.
Among the sharing methods, there is also "Notify" which points out
that existing users will simply be notified (this was not clear
before). Staff members can notify as many users as they want, but
regular users are restricted to one at a time, no more than
max_topic_invitations_per_day. The user will not receive another
notification if they have been notified of the same topic in past hour.
The "Create Invite" modal also suffered some changes: the two radio
boxes for selecting the type (invite or email) have been replaced by a
single checkbox (is email?) and then the two labels about emails have
been replaced by a single one, some fields were reordered and the
advanced options toggle was moved to the bottom right of the modal.
The "last custom date and time" shortcut for the topic timer and
bookmarks could get into a state where it had an Invalid Date if
the user opened the topic timer modal, clicked Custom Date and then
closed the modal without making changes. This has been fixed, the
last custom date + time will no longer be set in this case and if
somehow the last custom date + time is invalid that option will not
show.
Also improve the wording from just "Last" to "Last custom datetime"
When the user has not selected any tags and minimum_required_tags
is specified for a category, they get a clientside validation error
to tell them this. We were not doing the same thing when
min_tags_from_required_group and required_tag_groups was specified.
This moves the "This site was just updated" modal asking the user if they want to refresh into a subtle prompt that slides down from the header.
Also in this PR I've added a helper to publish message bus messages in JS tests. So instead of this:
```javascript
// Mimic a messagebus message
MessageBus.callbacks
.filterBy("channel", "/global/asset-version")
.map((c) => c.func("somenewversion"));
```
We can have:
```javascript
publishToMessageBus("/global/asset-version", "somenewversion");
```
Changing the invite type from link to email and then copying it was
confusing because it gave user the impression that the invite was
updated and the invite link will reflect the latest changes, but it
did not.
After clicking the message button on the group page, the composer shouldn't display the "official warning" checkbox. The discourse-bcc plugin also relies on this attribute to display an option in the composer.
This change makes is so that when a time-picking modal (e.g. "Add bookmark" modal) is visible, **all** global key bindings are paused.
1. Fixes an issue where opening and closing a time-picking modal would break global single-key keybinds, so for example, <kbd>L</kbd> would no longer like posts, but <kbd>L</kbd> <kbd>L</kbd> would
2. Fixes a related issue, where doing the above would also override custom keybinds provided by plugins (e.g. <kbd>L</kbd> shortcut that discourse-reactions uses)
Included:
* DEV: Reset Mousetraps instead of unbinding
* FIX: Make unbind use unbind
* DEV: Don't check for keyTrapper twice
* DEV: Use an instance of Mousetrap
* DEV: Remove an invalid `for` attribute (`set_reminder` doesn't exist)
* DEV: Add ability to pause all KeyboardShortcuts
* FIX: Pause all keybinds when in a time-picking modal
* DEV: Move bookmark keybind resets to willDestroyElement
* DEV: Fix shortcuts-related tests
The diff is confusing but the gist is that there are some topic acceptance tests that were incorrectly placed in "Topic featured links" group. This moves them into "Topic".
Moved tests:
* Converting to a public topic
* Unpinning unlisted topic
* selecting posts
* select below
* View Hidden Replies
* Quoting a quote keeps the original poster name
* Quoting a quote of a different topic keeps the original topic title
* Quoting a quote with the Reply button keeps the original poster name
* Quoting a quote with replyAsNewTopic keeps the original poster name
* Quoting by selecting text can mark the quote as full
This form does not need to show if discourse connect is enabled
because generally the fields that would be filled in here are
filled in by the SSO provider. There is also an issue right now
where enable_local_logins and enable_discourse_connect can be
true at the same time which is not right.
There are a lot of little fixes to tests here, but the biggest issue was
too much recursion because we kept replacing the helpers over and over
again. I assume Chrome has tail recursion or something to speed this up
but Firefox hated it.
Otherwise, we can't rely on the order of attributes in rendered HTML so
I simplified most of those tests to just look for key strings in the
HTML that are rendered.
Fixes an issue where the "Keep editing" button in the discard draft
modal wouldn't work when switching to a new topic with an open composer
and clicking Reply.
Followup to d470e4f
* DEV: Use custom tags rather than handlebars server side
These will be skipped if they are ever rendered in a document. The
handlebars really messes stuff up.
* DEV: Build our own locale file for testing purposes
We can't practically proxy everything in test mode, but we can
approximate the logic and build our own locale file for testing purposes
that works quite well. This allows us to run tests without a proxy.
* DEV: Support for testem runner for ember cli tests
We previously included this option conditionally when users were replying
or creating a new topic while they had content already in the composer.
This makes the dialog always include three buttons:
- Close and discard
- Close and save draft for later
- Keed editing
This also changes how the backend notifies the frontend when there is
a current draft topic. This is now sent via the `has_topic_draft`
property in the current user serializer.
This PR allows invitations to be used when the DiscourseConnect SSO is enabled for a site (`enable_discourse_connect`) and local logins are disabled. Previously invites could not be accepted with SSO enabled simply because we did not have the code paths to handle that logic.
The invitation methods that are supported include:
* Inviting people to groups via email address
* Inviting people to topics via email address
* Using invitation links generated by the Invite Users UI in the /my/invited/pending route
The flow works like this:
1. User visits an invite URL
2. The normal invitation validations (redemptions/expiry) happen at that point
3. We store the invite key in a secure session
4. The user clicks "Accept Invitation and Continue" (see below)
5. The user is redirected to /session/sso then to the SSO provider URL then back to /session/sso_login
6. We retrieve the invite based on the invite key in secure session. We revalidate the invitation. We show an error to the user if it is not valid. An additional check here for invites with an email specified is to check the SSO email matches the invite email
7. If the invite is OK we create the user via the normal SSO methods
8. We redeem the invite and activate the user. We clear the invite key in secure session.
9. If the invite had a topic we redirect the user there, otherwise we redirect to /
Note that we decided for SSO-based invites the `must_approve_users` site setting is ignored, because the invite is a form of pre-approval, and because regular non-staff users cannot send out email invites or generally invite to the forum in this case.
Also deletes some group invite checks as per https://github.com/discourse/discourse/pull/12353
