profiles
This commit is contained in:
Code
parent
488c524d55
commit
4b80930133
4
packages/osr-profiles/.npmignore
Normal file
4
packages/osr-profiles/.npmignore
Normal file
@ -0,0 +1,4 @@
|
|||||||
|
./docs
|
||||||
|
./scripts
|
||||||
|
./tests
|
||||||
|
./incoming
|
||||||
9
packages/osr-profiles/LICENSE
Normal file
9
packages/osr-profiles/LICENSE
Normal file
@ -0,0 +1,9 @@
|
|||||||
|
Copyright (c) <year> <owner> All rights reserved.
|
||||||
|
|
||||||
|
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
|
||||||
|
|
||||||
|
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
|
||||||
|
|
||||||
|
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
|
||||||
|
|
||||||
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
6
packages/osr-profiles/README.md
Normal file
6
packages/osr-profiles/README.md
Normal file
@ -0,0 +1,6 @@
|
|||||||
|
# osr-profiles
|
||||||
|
|
||||||
|
A bunch of defaults, to be expected at $osr-root/osr-profiles
|
||||||
|
|
||||||
|
- [x] OSR-Sync
|
||||||
|
- [ ] Bootstrap / Env
|
||||||
21
packages/osr-profiles/discourse/config.json
Normal file
21
packages/osr-profiles/discourse/config.json
Normal file
@ -0,0 +1,21 @@
|
|||||||
|
{
|
||||||
|
"D_ROOT_CAT": 97,
|
||||||
|
"D_ROOT_AFRICA": 79,
|
||||||
|
"D_ROOT_ASIA": 60,
|
||||||
|
"D_ROOT_EUROPE": 59,
|
||||||
|
"D_ROOT_AUSTRALIA": 76,
|
||||||
|
"D_ROOT_NAMERICA": 101,
|
||||||
|
"D_ROOT_SAMERICA": 102,
|
||||||
|
"D_ROOT_OCEANIA": 103,
|
||||||
|
"HT_CAT_ROOT": 54,
|
||||||
|
"HT_CAT_GUIDES": 86,
|
||||||
|
"HT_CAT_MACHINES": 87,
|
||||||
|
"HT_CAT_PRODUCTS": 88,
|
||||||
|
"HT_CAT_MOULDS": 89,
|
||||||
|
"MACHINE_CAT_INJECTION": 50,
|
||||||
|
"MACHINE_CAT_EXTRUSION": 51,
|
||||||
|
"MACHINE_CAT_SHREDDER": 52,
|
||||||
|
"MACHINE_CAT_SHEETPRESS": 63,
|
||||||
|
"MACHINE_CAT_3DPRINT": 70,
|
||||||
|
"MACHINE_CAT_MOULDS": 71
|
||||||
|
}
|
||||||
90
packages/osr-profiles/osrl/base.json
Normal file
90
packages/osr-profiles/osrl/base.json
Normal file
@ -0,0 +1,90 @@
|
|||||||
|
{
|
||||||
|
"includes": [
|
||||||
|
"${root}/osr",
|
||||||
|
"${root}/osr/widgets",
|
||||||
|
"${root}/_includes",
|
||||||
|
"${root}/templates/site/",
|
||||||
|
|
||||||
|
"${PRODUCT_ROOT}",
|
||||||
|
"${PRODUCT_ROOT}/templates/site/",
|
||||||
|
"${PRODUCT_ROOT}/templates/shared/"
|
||||||
|
],
|
||||||
|
"variables": {
|
||||||
|
"PRODUCT_ROOT": "${root}/${product}/",
|
||||||
|
|
||||||
|
"abs_url": "https://assets.osr-plastic.org",
|
||||||
|
|
||||||
|
"CACHE": "${root}/cache/",
|
||||||
|
|
||||||
|
"GIT_REPO": "https://git.osr-plastic.org/osr-plastic/osr-machines",
|
||||||
|
|
||||||
|
"OSR_MACHINES_ASSETS_URL": "https://assets.osr-plastic.org/machines/",
|
||||||
|
"PRODUCTS_ASSETS_URL": "https://assets.osr-plastic.org/machines/${product}",
|
||||||
|
|
||||||
|
"OSR_FILES_WEB": "http://files.osr-plastic.org/files/osr-machines",
|
||||||
|
"PRODUCTS_FILES_URL": "${OSR_FILES_WEB}/${product_rel}",
|
||||||
|
|
||||||
|
"vendor_name": "Plastic Hub",
|
||||||
|
"vendor_website": "https://osr-plastic.org/",
|
||||||
|
"vendor_products_external": "https://plastic-hub.com/products/",
|
||||||
|
"vendor_instagram": "https://www.instagram.com/osr_plastic/",
|
||||||
|
"_vendor_youtube": "https://www.youtube.com/channel/UCuWDxJtV2pf5BefHEy09Cew/featured?view_as=subscriber",
|
||||||
|
"vendor_github": "https://git.osr-plastic.org/osr-plastic",
|
||||||
|
"vendor_contact_email": "mailto:sales2@plastic-hub.com",
|
||||||
|
"vendor_whatsapp": "tel:0034691952287",
|
||||||
|
"vendor_facebook": "https://www.facebook.com/plastichubcat/",
|
||||||
|
"vendor_discord": "https://discord.gg/vR5d6ShTez",
|
||||||
|
"author_link_pp": "https://preciousplastic.com/",
|
||||||
|
"author_link": "https://osr-plastic.org",
|
||||||
|
"vendor_forum": "https://forum.osr-plastic.org",
|
||||||
|
"OSR_HOWTOS_ROOT_URL": "${vendor_forum}/c/wiki/howtos/72",
|
||||||
|
"OSR_HOWTOS_PATH": "../../ph3/pp-next2/howtos",
|
||||||
|
|
||||||
|
"show": {
|
||||||
|
"badges": false,
|
||||||
|
"authors": true,
|
||||||
|
"head": true,
|
||||||
|
"debug": false,
|
||||||
|
"wiki": false,
|
||||||
|
"forum": false,
|
||||||
|
"others": false,
|
||||||
|
"howtos": false,
|
||||||
|
"instagram": false,
|
||||||
|
"shipping": true,
|
||||||
|
"payment_terms": true
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"env": {
|
||||||
|
"bazar": {
|
||||||
|
"includes": [],
|
||||||
|
"variables": {
|
||||||
|
"abs_url": "https://dev.osr-plastic.org/"
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"bazar-release": {
|
||||||
|
"includes": [],
|
||||||
|
"variables": {
|
||||||
|
"abs_url": "https://shop.osr-plastic.org/"
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"test-import": {},
|
||||||
|
"forum":{
|
||||||
|
"includes": [],
|
||||||
|
"variables": {
|
||||||
|
"forum_url": "https://forum.osr-plastic.org/",
|
||||||
|
"show": {
|
||||||
|
"badges": false,
|
||||||
|
"authors": true,
|
||||||
|
"head": true,
|
||||||
|
"debug": true,
|
||||||
|
"forum": false,
|
||||||
|
"others": false,
|
||||||
|
"howtos": true,
|
||||||
|
"instagram": false,
|
||||||
|
"shipping": false,
|
||||||
|
"payment_terms": false
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
16
packages/osr-profiles/package-lock.json
generated
Normal file
16
packages/osr-profiles/package-lock.json
generated
Normal file
@ -0,0 +1,16 @@
|
|||||||
|
{
|
||||||
|
"name": "@plastichub/osr-profiles",
|
||||||
|
"version": "0.1",
|
||||||
|
"lockfileVersion": 3,
|
||||||
|
"requires": true,
|
||||||
|
"packages": {
|
||||||
|
"": {
|
||||||
|
"name": "@plastichub/osr-profiles",
|
||||||
|
"version": "0.1",
|
||||||
|
"license": "BSD-3-Clause",
|
||||||
|
"engines": {
|
||||||
|
"node": ">= 14.0.0"
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
20
packages/osr-profiles/package.json
Normal file
20
packages/osr-profiles/package.json
Normal file
@ -0,0 +1,20 @@
|
|||||||
|
{
|
||||||
|
"name": "@plastichub/osr-profiles",
|
||||||
|
"version": "0.1",
|
||||||
|
"main": "main.js",
|
||||||
|
"publishConfig": {
|
||||||
|
"access": "public"
|
||||||
|
},
|
||||||
|
"dependencies": {
|
||||||
|
|
||||||
|
},
|
||||||
|
"scripts": {
|
||||||
|
},
|
||||||
|
"engines": {
|
||||||
|
"node": ">= 14.0.0"
|
||||||
|
},
|
||||||
|
"license": "BSD-3-Clause",
|
||||||
|
"keywords": [
|
||||||
|
"typescript"
|
||||||
|
]
|
||||||
|
}
|
||||||
975
packages/osr-profiles/print/slic3r_defaults.yaml
Normal file
975
packages/osr-profiles/print/slic3r_defaults.yaml
Normal file
@ -0,0 +1,975 @@
|
|||||||
|
title: NodeSlicer Configuration Schema
|
||||||
|
type: object
|
||||||
|
oneOf:
|
||||||
|
- required: [inputFile]
|
||||||
|
- required: [inputFiles]
|
||||||
|
properties:
|
||||||
|
# Additional NodeSlicer parameters
|
||||||
|
header:
|
||||||
|
description: Print the Slic3r header line with timestamp
|
||||||
|
default: true
|
||||||
|
type: boolean
|
||||||
|
# IO settings
|
||||||
|
save:
|
||||||
|
description: Save configuration to the specified file
|
||||||
|
type: string
|
||||||
|
|
||||||
|
load:
|
||||||
|
description: >
|
||||||
|
Load configuration from the specified file.
|
||||||
|
It can be used more than once to load options from multiple files.
|
||||||
|
type: string
|
||||||
|
|
||||||
|
outputFile:
|
||||||
|
description: File to output GCode to
|
||||||
|
type: string
|
||||||
|
|
||||||
|
outputFiles:
|
||||||
|
description: Files to output GCode to
|
||||||
|
type: array
|
||||||
|
items:
|
||||||
|
type: string
|
||||||
|
|
||||||
|
outputDirectory:
|
||||||
|
description: Directory to output GCode-files to
|
||||||
|
type: string
|
||||||
|
|
||||||
|
inputFile:
|
||||||
|
description: Input STL-file
|
||||||
|
type: string
|
||||||
|
|
||||||
|
inputFiles:
|
||||||
|
description: Input STL-files
|
||||||
|
type: array
|
||||||
|
items:
|
||||||
|
type: string
|
||||||
|
|
||||||
|
# Non-slicing actions (no GCode will be generated):
|
||||||
|
repair:
|
||||||
|
description: Repair given STL files and save them as <name>_fixed.obj
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
cut:
|
||||||
|
description: >
|
||||||
|
Cut given input files at given Z (relative) and
|
||||||
|
export them as <name>_upper.stl and <name>_lower.stl
|
||||||
|
type: number
|
||||||
|
|
||||||
|
info:
|
||||||
|
description: Output information about the supplied file(s)
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
split:
|
||||||
|
description: Split the shells contained in given STL file into several STL files
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
threads:
|
||||||
|
description: Number of threads to use
|
||||||
|
type: number
|
||||||
|
default: 2
|
||||||
|
minimum: 1
|
||||||
|
|
||||||
|
# Output options:
|
||||||
|
postProcessScripts:
|
||||||
|
description: >
|
||||||
|
Generated GCode will be processed with the supplied scripts.
|
||||||
|
type: array
|
||||||
|
item:
|
||||||
|
type: string
|
||||||
|
|
||||||
|
exportSvg:
|
||||||
|
description: Export a SVG file containing slices instead of GCode.
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
outputFilenameFormat:
|
||||||
|
description: Output file name format; all config options enclosed in brackets will be replaced by their values, as well as [input_filename_base] and [input_filename]
|
||||||
|
type: string
|
||||||
|
|
||||||
|
merge:
|
||||||
|
description: >
|
||||||
|
If multiple files are supplied, they will be composed into a single
|
||||||
|
print rather than processed individually.
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
# Printer Options
|
||||||
|
nozzleDiameter:
|
||||||
|
description: Diameter of nozzle in mm
|
||||||
|
type: number
|
||||||
|
default: 0.5
|
||||||
|
|
||||||
|
printCenter:
|
||||||
|
description: Coordinates in mm of the point to center the print around
|
||||||
|
type: object
|
||||||
|
properties:
|
||||||
|
x:
|
||||||
|
type: number
|
||||||
|
y:
|
||||||
|
type: number
|
||||||
|
default:
|
||||||
|
x: 100
|
||||||
|
y: 100
|
||||||
|
|
||||||
|
zOffset:
|
||||||
|
description: Additional height in mm to add to vertical coordinates
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
GCodeFlavor:
|
||||||
|
description: The type of GCode to generate
|
||||||
|
default: reprap
|
||||||
|
enum:
|
||||||
|
- reprap
|
||||||
|
- marlin
|
||||||
|
- teacup
|
||||||
|
- makerware
|
||||||
|
- sailfish
|
||||||
|
- mach3
|
||||||
|
- noExtrusion
|
||||||
|
|
||||||
|
useRelativeEDistances:
|
||||||
|
description: Enable this to get relative E values
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
useFirmwareRetraction:
|
||||||
|
description: Enable firmwareControlled retraction using G10/G11
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
useVolumetricE:
|
||||||
|
description: Express E in cubic millimeters and prepend M200
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
GCodeArcs:
|
||||||
|
description: >
|
||||||
|
Use G2/G3 commands for native arcs
|
||||||
|
(experimental, not supported by all firmwares)
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
g0:
|
||||||
|
description: >
|
||||||
|
Use G0 commands for retraction
|
||||||
|
(experimental, not supported by all firmwares)
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
GCodeComments:
|
||||||
|
description: Make GCode verbose by adding comments
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
vibrationLimit:
|
||||||
|
description: >
|
||||||
|
Limit the frequency of moves on x- and yAxes in Hz
|
||||||
|
(set zero to disable)
|
||||||
|
default: 0
|
||||||
|
type: number
|
||||||
|
|
||||||
|
pressureAdvance:
|
||||||
|
description: >
|
||||||
|
Adjust pressure using the experimental advance algorithm
|
||||||
|
(K constant, set zero to disable)
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
# Filament Options
|
||||||
|
filamentDiameter:
|
||||||
|
description: Diameter in mm of your raw filament
|
||||||
|
type: number
|
||||||
|
default: 3
|
||||||
|
|
||||||
|
extrusionMultiplier:
|
||||||
|
description: >
|
||||||
|
Change this to alter the amount of plastic extruded.
|
||||||
|
There should be very little need to change this value,
|
||||||
|
which is only useful to compensate for filament packing
|
||||||
|
type: number
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
temperature:
|
||||||
|
description: Extrusion temperature in degree Celsius (set 0 to disable)
|
||||||
|
type: number
|
||||||
|
default: 200
|
||||||
|
|
||||||
|
firstLayerTemperature:
|
||||||
|
description: >
|
||||||
|
Extrusion temperature for the first layer in degree Celsius,
|
||||||
|
(set 0 to disable)
|
||||||
|
default: 200
|
||||||
|
type: number
|
||||||
|
|
||||||
|
bedTemperature:
|
||||||
|
description: Heated bed temperature in degree Celsius (set 0 to disable)
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
firstLayerBedTemperature:
|
||||||
|
description: >
|
||||||
|
Heated bed temperature for the first layer in degree Celsius
|
||||||
|
(set 0 to disable)
|
||||||
|
default: 0
|
||||||
|
type: number
|
||||||
|
# Speed options
|
||||||
|
travelSpeed:
|
||||||
|
description: Speed of non-print moves in mm/s
|
||||||
|
type: number
|
||||||
|
default: 130
|
||||||
|
|
||||||
|
perimeterSpeed:
|
||||||
|
description: Speed of print moves for perimeters in mm/s
|
||||||
|
type: number
|
||||||
|
default: 30
|
||||||
|
|
||||||
|
smallPerimeterSpeed:
|
||||||
|
description: >
|
||||||
|
Speed of print moves for small perimeters in mm/s
|
||||||
|
or % over perimeter speed
|
||||||
|
oneOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 30
|
||||||
|
type: number
|
||||||
|
|
||||||
|
externalPerimeterSpeed:
|
||||||
|
description: >
|
||||||
|
Speed of print moves for the external perimeter in mm/s
|
||||||
|
or % over perimeter speed
|
||||||
|
oneOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 70%
|
||||||
|
type: number
|
||||||
|
|
||||||
|
infillSpeed:
|
||||||
|
description: Speed of print moves in mm/s
|
||||||
|
type: number
|
||||||
|
default: 60
|
||||||
|
|
||||||
|
solidInfillSpeed:
|
||||||
|
description: >
|
||||||
|
Speed of print moves for solid surfaces in mm/s
|
||||||
|
or % over infill speed
|
||||||
|
anyOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 60
|
||||||
|
type: number
|
||||||
|
|
||||||
|
topSolidInfillSpeed:
|
||||||
|
description: >
|
||||||
|
Speed of print moves for top surfaces in mm/s
|
||||||
|
or % over solid infill speed
|
||||||
|
anyOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 50
|
||||||
|
type: number
|
||||||
|
|
||||||
|
supportMaterialSpeed:
|
||||||
|
description: Speed of support material print moves in mm/s
|
||||||
|
type: number
|
||||||
|
default: 60
|
||||||
|
|
||||||
|
supportMaterialInterfaceSpeed:
|
||||||
|
description: >
|
||||||
|
Speed of support material interface print moves in mm/s
|
||||||
|
or % over support material speed
|
||||||
|
anyOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 100%
|
||||||
|
type: number
|
||||||
|
|
||||||
|
bridgeSpeed:
|
||||||
|
description: Speed of bridge print moves in mm/s
|
||||||
|
type: number
|
||||||
|
default: 60
|
||||||
|
|
||||||
|
gapFillSpeed:
|
||||||
|
description: Speed of gap fill print moves in mm/s
|
||||||
|
type: number
|
||||||
|
default: 20
|
||||||
|
|
||||||
|
firstLayerSpeed:
|
||||||
|
description: >
|
||||||
|
Speed of print moves for bottom layer,
|
||||||
|
expressed either as an absolute value
|
||||||
|
or as a percentage over normal speeds
|
||||||
|
anyOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 30%
|
||||||
|
type: number
|
||||||
|
|
||||||
|
# Acceleration Options
|
||||||
|
perimeterAcceleration:
|
||||||
|
description: >
|
||||||
|
Overrides firmware's default acceleration for perimeters in mm/s^2
|
||||||
|
(set zero to disable)
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
infillAcceleration:
|
||||||
|
description: >
|
||||||
|
Overrides firmware's default acceleration for infill in mm/s^2
|
||||||
|
(set zero to disable)
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
bridgeAcceleration:
|
||||||
|
description: >
|
||||||
|
Overrides firmware's default acceleration for bridges in mm/s^2
|
||||||
|
(set zero to disable)
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
firstLayerAcceleration:
|
||||||
|
description: >
|
||||||
|
Overrides firmware's default acceleration for first layer in mm/s^2
|
||||||
|
(set zero to disable)
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
defaultAcceleration:
|
||||||
|
description: >
|
||||||
|
Acceleration will be reset to this value in mm/s^2
|
||||||
|
after the specific settings above have been applied.
|
||||||
|
(set zero to disable).
|
||||||
|
This is the acceleration your printer will be reset to after
|
||||||
|
the role-specific acceleration values are used (perimeter/infill).
|
||||||
|
Set zero to prevent resetting acceleration at all.
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
# Accuracy Options:
|
||||||
|
layerHeight:
|
||||||
|
description: Layer height in mm
|
||||||
|
type: number
|
||||||
|
default: 0.4
|
||||||
|
|
||||||
|
firstLayerHeight:
|
||||||
|
description: Layer height for first layer in mm or %
|
||||||
|
anyOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 0.35
|
||||||
|
type: number
|
||||||
|
|
||||||
|
infillEveryLayers:
|
||||||
|
description: Infill every N layers
|
||||||
|
type: number
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
solidInfillEveryLayers:
|
||||||
|
description: Force a solid layer every N layers
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
# Print Options
|
||||||
|
perimeters:
|
||||||
|
description: Number of perimeters/horizontal skins
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
default: 3
|
||||||
|
|
||||||
|
topSolidLayers:
|
||||||
|
description: Number of solid layers to do for top surfaces
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
default: 3
|
||||||
|
|
||||||
|
bottomSolidLayers:
|
||||||
|
description: Number of solid layers to do for bottom surfaces
|
||||||
|
minimum: 0
|
||||||
|
default: 3
|
||||||
|
type: number
|
||||||
|
|
||||||
|
solidLayers:
|
||||||
|
description: Shortcut for setting the two options above at once
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
fillDensity:
|
||||||
|
description: Infill density
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
maximum: 1
|
||||||
|
default: 0.4
|
||||||
|
|
||||||
|
fillAngle:
|
||||||
|
description: Infill angle in degrees
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
maximum: 90
|
||||||
|
default: 45
|
||||||
|
|
||||||
|
fillPattern:
|
||||||
|
description: Pattern to use to fill nonSolid layers
|
||||||
|
type: string
|
||||||
|
default: honeycomb
|
||||||
|
|
||||||
|
solidFillPattern:
|
||||||
|
description: Pattern to use to fill solid layers
|
||||||
|
type: string
|
||||||
|
default: rectilinear
|
||||||
|
|
||||||
|
startGCode:
|
||||||
|
description: >
|
||||||
|
Load initial GCode from the supplied file.
|
||||||
|
This will overwrite the default command (home all axes [G28]).
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
endGCode:
|
||||||
|
description: >
|
||||||
|
Load final GCode from the supplied file.
|
||||||
|
This will overwrite the default commands
|
||||||
|
(turn off temperature [M104 S0],
|
||||||
|
home X axis [G28 X], disable motors [M84]).
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
layerGCode:
|
||||||
|
description: Load layer-change GCode from the supplied file
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
toolchangeGCode:
|
||||||
|
description: Load toolChange GCode from the supplied file
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
seamPosition:
|
||||||
|
description: Position of loop starting points
|
||||||
|
enum:
|
||||||
|
- random
|
||||||
|
- nearest
|
||||||
|
- aligned
|
||||||
|
default: aligned
|
||||||
|
type: string
|
||||||
|
|
||||||
|
externalPerimetersFirst:
|
||||||
|
description: Reverse perimeter order
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
spiralVase:
|
||||||
|
description: >
|
||||||
|
Experimental option to raise Z gradually
|
||||||
|
when printing singleWalled vases
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
onlyRetractWhenCrossingPerimeters:
|
||||||
|
description: >
|
||||||
|
Disable retraction when travelling between
|
||||||
|
infill paths inside the same island.
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
solidInfillBelowArea:
|
||||||
|
description: >
|
||||||
|
Force solid infill when a region has a smaller area
|
||||||
|
than this threshold in mm^2
|
||||||
|
type: number
|
||||||
|
default: 70
|
||||||
|
|
||||||
|
infillOnlyWhereNeeded:
|
||||||
|
description: Only infill under ceilings
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
infillFirst:
|
||||||
|
description: Make infill before perimeters
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
# Quality options (slower slicing)
|
||||||
|
extraPerimeters:
|
||||||
|
description: Add more perimeters when needed
|
||||||
|
type: boolean
|
||||||
|
default: true
|
||||||
|
|
||||||
|
avoidCrossingPerimeters:
|
||||||
|
description: Optimize travel moves so that no perimeters are crossed
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
thinWalls:
|
||||||
|
description: Detect single-width walls
|
||||||
|
type: boolean
|
||||||
|
default: true
|
||||||
|
|
||||||
|
overhangs:
|
||||||
|
description: >
|
||||||
|
Experimental option to use bridge flow,
|
||||||
|
speed and fan for overhangs
|
||||||
|
type: boolean
|
||||||
|
default: true
|
||||||
|
|
||||||
|
# Support material options
|
||||||
|
supportMaterial:
|
||||||
|
description: Generate support material for overhangs
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
supportMaterialThreshold:
|
||||||
|
description: Overhang threshold angle (set 0 for automatic detection)
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
maximum: 90
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
supportMaterialPattern:
|
||||||
|
description: Pattern to use for support material
|
||||||
|
type: string
|
||||||
|
default: pillars
|
||||||
|
|
||||||
|
supportMaterialSpacing:
|
||||||
|
description: Spacing between pattern lines in mm
|
||||||
|
type: number
|
||||||
|
default: 2.5
|
||||||
|
|
||||||
|
supportMaterialAngle:
|
||||||
|
description: Support material angle in degrees
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
maximum: 90
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
supportMaterialInterfaceLayers:
|
||||||
|
description: >
|
||||||
|
Number of perpendicular layers between
|
||||||
|
support material and object
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
default: 3
|
||||||
|
|
||||||
|
supportMaterialInterfaceSpacing:
|
||||||
|
description: >
|
||||||
|
Spacing between interface pattern lines in mm
|
||||||
|
(set 0 to get a solid layer)
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
raftLayers:
|
||||||
|
description: Number of layers to raise the printed objects by
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
supportMaterialEnforceLayers:
|
||||||
|
description: >
|
||||||
|
Enforce support material on the specified number of layers from bottom,
|
||||||
|
regardless of support-material and threshold
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
dontSupportBridges:
|
||||||
|
description: >
|
||||||
|
Experimental option for preventing support-material
|
||||||
|
from being generated under bridged areas
|
||||||
|
type: boolean
|
||||||
|
default: true
|
||||||
|
|
||||||
|
# Retraction options:
|
||||||
|
retractLength:
|
||||||
|
description: Length of retraction in mm when pausing extrusion
|
||||||
|
type: number
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
retractSpeed:
|
||||||
|
description: Speed for retraction in mm/s
|
||||||
|
type: number
|
||||||
|
default: 30
|
||||||
|
|
||||||
|
retractRestartExtra:
|
||||||
|
description: >
|
||||||
|
Additional amount of filament in mm
|
||||||
|
to push after compensating retraction
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
retractBeforeTravel:
|
||||||
|
description: Only retract before travel moves of this length in mm
|
||||||
|
type: number
|
||||||
|
default: 2
|
||||||
|
|
||||||
|
retractLift:
|
||||||
|
description: Lift Z by the given distance in mm when retracting
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
retractLayerChange:
|
||||||
|
description: Enforce a retraction before each Z move
|
||||||
|
type: boolean
|
||||||
|
default: true
|
||||||
|
|
||||||
|
wipe:
|
||||||
|
description: Wipe the nozzle while doing a retraction
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
# Retraction options for multi-extruder setups
|
||||||
|
retractLengthToolchange:
|
||||||
|
description: >
|
||||||
|
Length of retraction in mm when disabling tool.
|
||||||
|
When retraction is triggered before changing tool,
|
||||||
|
filament is pulled back by the specified amount
|
||||||
|
(the length is measured on raw filament, before it enters the extruder).
|
||||||
|
type: number
|
||||||
|
default: 10
|
||||||
|
|
||||||
|
retractRestartExtraToolchange:
|
||||||
|
description: >
|
||||||
|
Additional amount of filament in mm
|
||||||
|
to push after switching tool
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
# Cooling options:
|
||||||
|
cooling:
|
||||||
|
description: Enable fan and cooling control
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
minFanSpeed:
|
||||||
|
description: Minimum fan speed
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
maximum: 1
|
||||||
|
default: 0.35
|
||||||
|
|
||||||
|
maxFanSpeed:
|
||||||
|
description: Maximum fan speed
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
maximum: 1
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
bridgeFanSpeed:
|
||||||
|
description: Fan speed to use when bridging
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
maximum: 1
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
fanBelowLayerTime:
|
||||||
|
description: >
|
||||||
|
Enable fan if layer print time is below
|
||||||
|
this approximate number of seconds
|
||||||
|
type: number
|
||||||
|
default: 60
|
||||||
|
|
||||||
|
slowdownBelowLayerTime:
|
||||||
|
description: >
|
||||||
|
Slow down if layer print time is below
|
||||||
|
this approximate number of seconds
|
||||||
|
type: number
|
||||||
|
default: 30
|
||||||
|
|
||||||
|
minPrintSpeed:
|
||||||
|
description: Minimum print speed in mm/s
|
||||||
|
type: number
|
||||||
|
default: 10
|
||||||
|
|
||||||
|
disableFanFirstLayers:
|
||||||
|
description: Disable fan for the first n layers
|
||||||
|
type: number
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
fanAlwaysOn:
|
||||||
|
description: >
|
||||||
|
Keep fan always on at min fan speed,
|
||||||
|
even for layers that don't need cooling
|
||||||
|
type: boolean
|
||||||
|
|
||||||
|
# Skirt options:
|
||||||
|
skirts:
|
||||||
|
description: Number of skirts to draw
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
skirtDistance:
|
||||||
|
description: Distance in mm between innermost skirt and object
|
||||||
|
type: number
|
||||||
|
default: 6
|
||||||
|
|
||||||
|
skirtHeight:
|
||||||
|
description: Height of skirts to draw (expressed in layers)
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
minSkirtLength:
|
||||||
|
description: >
|
||||||
|
Generate no less than the number of loops required to consume
|
||||||
|
this length of filament on the first layer, for each extruder in mm
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
brimWidth:
|
||||||
|
description: >
|
||||||
|
Width of the brim in mm that will get added to
|
||||||
|
each object to help adhesion
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
# Transform options:
|
||||||
|
scale:
|
||||||
|
description: Factor for scaling input object
|
||||||
|
type: number
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
rotate:
|
||||||
|
description: Rotation angle in degrees
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
maximum: 360
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
duplicate:
|
||||||
|
description: Number of items with autoArrange
|
||||||
|
type: number
|
||||||
|
minimum: 1
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
duplicateGrid:
|
||||||
|
description: Number of items with grid arrangement
|
||||||
|
type: string
|
||||||
|
default: 1,1
|
||||||
|
|
||||||
|
duplicateDistance:
|
||||||
|
description: Distance in mm between copies
|
||||||
|
type: number
|
||||||
|
default: 6
|
||||||
|
|
||||||
|
xySizeCompensation:
|
||||||
|
description: Grow/shrink objects by the configured absolute distance in mm
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
# Sequential printing options
|
||||||
|
completeObjects:
|
||||||
|
description: >
|
||||||
|
When printing multiple objects and/or copies,
|
||||||
|
complete each one before starting the next one
|
||||||
|
(watch out for extruder collisions)
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
extruderClearanceRadius:
|
||||||
|
description: >
|
||||||
|
Radius in mm above which extruder
|
||||||
|
won't collide with anything
|
||||||
|
type: number
|
||||||
|
default: 20
|
||||||
|
|
||||||
|
extruderClearanceHeight:
|
||||||
|
description: >
|
||||||
|
Maximum vertical extruder depth.
|
||||||
|
I.e. vertical distance from extruder tip and carriage bottom
|
||||||
|
type: number
|
||||||
|
default: 20
|
||||||
|
|
||||||
|
# Miscellaneous options
|
||||||
|
notes:
|
||||||
|
description: Notes to be added as comments to the output file
|
||||||
|
type: string
|
||||||
|
default: ""
|
||||||
|
|
||||||
|
resolution:
|
||||||
|
description: >
|
||||||
|
Minimum detail resolution in mm
|
||||||
|
(set 0 for full resolution)
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
bedSize:
|
||||||
|
description: Bed size in mm (only used for auto-arrange)
|
||||||
|
type: object
|
||||||
|
properties:
|
||||||
|
width:
|
||||||
|
type: number
|
||||||
|
default: 200
|
||||||
|
height:
|
||||||
|
type: number
|
||||||
|
default: 200
|
||||||
|
|
||||||
|
# Flow options (advanced)
|
||||||
|
extrusionWidth:
|
||||||
|
description: >
|
||||||
|
Set extrusion width manually.
|
||||||
|
It accepts either an absolute value in mm (like 0.65)
|
||||||
|
or a percentage over layer height (like 200%).
|
||||||
|
If left to zero, width gets calculated automatically.
|
||||||
|
oneOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
firstLayerExtrusionWidth:
|
||||||
|
description: >
|
||||||
|
Set a different extrusion width for first layer.
|
||||||
|
When printing with very low layer heights,
|
||||||
|
you might still want to print a thicker bottom layer to improve adhesion
|
||||||
|
and tolerance for non perfect build plates.
|
||||||
|
This can be expressed as an absolute value in mm or as a percentage
|
||||||
|
(for example: 150%) over the default layer height.
|
||||||
|
oneOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
perimeterExtrusionWidth:
|
||||||
|
description: >
|
||||||
|
Set this to a non-zero value in mm to set a manual extrusion width
|
||||||
|
for perimeters.
|
||||||
|
You may want to use thinner extrudates to get more accurate surfaces.
|
||||||
|
If expressed as percentage (for example 200%)
|
||||||
|
it will be computed over layer height.
|
||||||
|
oneOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
externalPerimeterExtrusionWidth:
|
||||||
|
description: >
|
||||||
|
Set a different extrusion width for external perimeters.
|
||||||
|
Set this to a non-zero value to set a manual extrusion width in mm
|
||||||
|
for external perimeters.
|
||||||
|
If left 0, an automatic value will be used that maximizes accuracy
|
||||||
|
of the external visible surfaces.
|
||||||
|
If expressed as percentage (for example 200%)
|
||||||
|
it will be computed over layer height.
|
||||||
|
oneOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
infillExtrusionWidth:
|
||||||
|
description: >
|
||||||
|
Set a different extrusion width for infill.
|
||||||
|
Set this to a non-zero value to set a manual extrusion width
|
||||||
|
in mm for infill.
|
||||||
|
You may want to use fatter extrudates to speed up the infill
|
||||||
|
and make your parts stronger.
|
||||||
|
If expressed as percentage (for example 90%)
|
||||||
|
it will be computed over layer height.
|
||||||
|
oneOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
solidInfillExtrusionWidth:
|
||||||
|
description: >
|
||||||
|
Set a different extrusion width for solid infill.
|
||||||
|
Set this to a non-zero value to set a manual extrusion width
|
||||||
|
in mm for infill for solid surfaces.
|
||||||
|
If expressed as percentage (for example 90%)
|
||||||
|
it will be computed over layer height.
|
||||||
|
oneOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
topInfillExtrusionWidth:
|
||||||
|
description: >
|
||||||
|
Set a different extrusion width for top infill.
|
||||||
|
Set this to a non-zero value to set a manual extrusion width
|
||||||
|
in mm for infill for top surfaces.
|
||||||
|
You may want to use thinner extrudates to fill all narrow regions and
|
||||||
|
get a smoother finish.
|
||||||
|
If expressed as percentage (for example 90%)
|
||||||
|
it will be computed over layer height.
|
||||||
|
oneOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
supportMaterialExtrusionWidth:
|
||||||
|
description: >
|
||||||
|
Set a different extrusion width for support material.
|
||||||
|
Set this to a non-zero value to set a manual extrusion width
|
||||||
|
in mm for support material.
|
||||||
|
If expressed as percentage (for example 90%)
|
||||||
|
it will be computed over layer height.
|
||||||
|
oneOf:
|
||||||
|
- type: number
|
||||||
|
- type: string
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
bridgeFlowRatio:
|
||||||
|
description: >
|
||||||
|
Multiplier for extrusion when bridging.
|
||||||
|
This factor affects the amount of plastic for bridging.
|
||||||
|
You can decrease it slightly to pull the extrudates and prevent sagging,
|
||||||
|
although default settings are usually good and you should experiment
|
||||||
|
with cooling (use a fan) before tweaking this.
|
||||||
|
type: number
|
||||||
|
minimum: 0
|
||||||
|
exclusiveMinimum: true
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
# Multiple extruder options:
|
||||||
|
extruderOffset:
|
||||||
|
description: >
|
||||||
|
Offset of each extruder if firmware doesn't handle the displacement
|
||||||
|
(can be specified multiple times).
|
||||||
|
If your firmware doesn't handle the extruder displacement you need
|
||||||
|
the G-code to take it into account.
|
||||||
|
This option lets you specify the displacement of each extruder with
|
||||||
|
respect to the first one. It expects positive coordinates
|
||||||
|
(they will be subtracted from the XY coordinate).
|
||||||
|
type: object
|
||||||
|
properties:
|
||||||
|
x:
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
y:
|
||||||
|
type: number
|
||||||
|
default: 0
|
||||||
|
|
||||||
|
perimeterExtruder:
|
||||||
|
description: Extruder to use for perimeters
|
||||||
|
type: number
|
||||||
|
minimum: 1
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
infillExtruder:
|
||||||
|
description: Extruder to use for infill
|
||||||
|
type: number
|
||||||
|
minimum: 1
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
solidInfillExtruder:
|
||||||
|
description: Extruder to use for solid infill
|
||||||
|
type: number
|
||||||
|
minimum: 1
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
supportMaterialExtruder:
|
||||||
|
description: Extruder to use for support material
|
||||||
|
type: number
|
||||||
|
minimum: 1
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
supportMaterialInterfaceExtruder:
|
||||||
|
description: Extruder to use for support material interface
|
||||||
|
type: number
|
||||||
|
minimum: 1
|
||||||
|
default: 1
|
||||||
|
|
||||||
|
oozePrevention:
|
||||||
|
description: >
|
||||||
|
Drop temperature and park extruders outside a full
|
||||||
|
skirt for automatic wiping
|
||||||
|
type: boolean
|
||||||
|
default: false
|
||||||
|
|
||||||
|
standbyTemperatureDelta:
|
||||||
|
description: >
|
||||||
|
Temperature difference to be applied when an extruder
|
||||||
|
is not active and ooze-prevention is enabled
|
||||||
|
type: number
|
||||||
|
minimum: -400
|
||||||
|
maximum: 400
|
||||||
|
default: -5
|
||||||
119
packages/osr-profiles/print/tests/profile.json
Normal file
119
packages/osr-profiles/print/tests/profile.json
Normal file
@ -0,0 +1,119 @@
|
|||||||
|
{
|
||||||
|
"dry": false,
|
||||||
|
"alt": false,
|
||||||
|
"header": true,
|
||||||
|
"split": false,
|
||||||
|
"threads": 2,
|
||||||
|
"nozzleDiameter": 0.5,
|
||||||
|
"printCenter": {
|
||||||
|
"x": 100,
|
||||||
|
"y": 100
|
||||||
|
},
|
||||||
|
"zOffset": 0,
|
||||||
|
"GCodeFlavor": "marlin",
|
||||||
|
"useRelativeEDistances": false,
|
||||||
|
"useFirmwareRetraction": false,
|
||||||
|
"useVolumetricE": false,
|
||||||
|
"GCodeArcs": false,
|
||||||
|
"g0": false,
|
||||||
|
"GCodeComments": false,
|
||||||
|
"vibrationLimit": 0,
|
||||||
|
"pressureAdvance": 0,
|
||||||
|
"filamentDiameter": 3,
|
||||||
|
"extrusionMultiplier": 1,
|
||||||
|
"temperature": 200,
|
||||||
|
"firstLayerTemperature": 200,
|
||||||
|
"bedTemperature": 0,
|
||||||
|
"firstLayerBedTemperature": 0,
|
||||||
|
"travelSpeed": 130,
|
||||||
|
"perimeterSpeed": 30,
|
||||||
|
"smallPerimeterSpeed": 30,
|
||||||
|
"externalPerimeterSpeed": "70%",
|
||||||
|
"infillSpeed": 60,
|
||||||
|
"solidInfillSpeed": 60,
|
||||||
|
"topSolidInfillSpeed": 50,
|
||||||
|
"supportMaterialSpeed": 60,
|
||||||
|
"supportMaterialInterfaceSpeed": "100%",
|
||||||
|
"bridgeSpeed": 60,
|
||||||
|
"gapFillSpeed": 20,
|
||||||
|
"firstLayerSpeed": "30%",
|
||||||
|
"perimeterAcceleration": 0,
|
||||||
|
"infillAcceleration": 0,
|
||||||
|
"bridgeAcceleration": 0,
|
||||||
|
"firstLayerAcceleration": 0,
|
||||||
|
"defaultAcceleration": 0,
|
||||||
|
"layerHeight": 0.4,
|
||||||
|
"firstLayerHeight": 0.35,
|
||||||
|
"infillEveryLayers": 1,
|
||||||
|
"solidInfillEveryLayers": 0,
|
||||||
|
"perimeters": 3,
|
||||||
|
"topSolidLayers": 3,
|
||||||
|
"bottomSolidLayers": 3,
|
||||||
|
"fillDensity": 0.4,
|
||||||
|
"fillAngle": 45,
|
||||||
|
"fillPattern": "honeycomb",
|
||||||
|
"solidFillPattern": "rectilinear",
|
||||||
|
"seamPosition": "aligned",
|
||||||
|
"externalPerimetersFirst": false,
|
||||||
|
"spiralVase": false,
|
||||||
|
"onlyRetractWhenCrossingPerimeters": false,
|
||||||
|
"solidInfillBelowArea": 70,
|
||||||
|
"infillOnlyWhereNeeded": false,
|
||||||
|
"infillFirst": false,
|
||||||
|
"extraPerimeters": true,
|
||||||
|
"avoidCrossingPerimeters": false,
|
||||||
|
"thinWalls": true,
|
||||||
|
"overhangs": true,
|
||||||
|
"supportMaterialThreshold": 0,
|
||||||
|
"supportMaterialPattern": "pillars",
|
||||||
|
"supportMaterialSpacing": 2.5,
|
||||||
|
"supportMaterialAngle": 0,
|
||||||
|
"supportMaterialInterfaceLayers": 3,
|
||||||
|
"supportMaterialInterfaceSpacing": 0,
|
||||||
|
"raftLayers": 0,
|
||||||
|
"supportMaterialEnforceLayers": 0,
|
||||||
|
"dontSupportBridges": true,
|
||||||
|
"retractLength": 1,
|
||||||
|
"retractSpeed": 30,
|
||||||
|
"retractRestartExtra": 0,
|
||||||
|
"retractBeforeTravel": 2,
|
||||||
|
"retractLift": 0,
|
||||||
|
"retractLayerChange": true,
|
||||||
|
"wipe": false,
|
||||||
|
"retractLengthToolchange": 10,
|
||||||
|
"retractRestartExtraToolchange": 0,
|
||||||
|
"minFanSpeed": 0.35,
|
||||||
|
"maxFanSpeed": 1,
|
||||||
|
"bridgeFanSpeed": 1,
|
||||||
|
"fanBelowLayerTime": 60,
|
||||||
|
"slowdownBelowLayerTime": 30,
|
||||||
|
"minPrintSpeed": 10,
|
||||||
|
"disableFanFirstLayers": 1,
|
||||||
|
"skirts": 1,
|
||||||
|
"skirtDistance": 6,
|
||||||
|
"skirtHeight": 1,
|
||||||
|
"minSkirtLength": 0,
|
||||||
|
"brimWidth": 0,
|
||||||
|
"scale": 1,
|
||||||
|
"rotate": 0,
|
||||||
|
"duplicate": 1,
|
||||||
|
"duplicateGrid": "1,1",
|
||||||
|
"duplicateDistance": 6,
|
||||||
|
"completeObjects": false,
|
||||||
|
"extruderClearanceRadius": 20,
|
||||||
|
"extruderClearanceHeight": 20,
|
||||||
|
"notes": "",
|
||||||
|
"resolution": 0,
|
||||||
|
"bridgeFlowRatio": 1,
|
||||||
|
"perimeterExtruder": 1,
|
||||||
|
"infillExtruder": 1,
|
||||||
|
"solidInfillExtruder": 1,
|
||||||
|
"supportMaterialExtruder": 1,
|
||||||
|
"supportMaterialInterfaceExtruder": 1,
|
||||||
|
"oozePrevention": false,
|
||||||
|
"standbyTemperatureDelta": -5,
|
||||||
|
"extruderOffset": {
|
||||||
|
"x": 0,
|
||||||
|
"y": 0
|
||||||
|
}
|
||||||
|
}
|
||||||
3
packages/osr-profiles/sync/.osr-cad-public.json
Normal file
3
packages/osr-profiles/sync/.osr-cad-public.json
Normal file
@ -0,0 +1,3 @@
|
|||||||
|
{
|
||||||
|
"extensions":"json|html|step|x_t|xls"
|
||||||
|
}
|
||||||
6
packages/osr-profiles/sync/.osr-sync-all.json
Normal file
6
packages/osr-profiles/sync/.osr-sync-all.json
Normal file
@ -0,0 +1,6 @@
|
|||||||
|
{
|
||||||
|
"debug": false,
|
||||||
|
"matching": [
|
||||||
|
"**/*.*"
|
||||||
|
]
|
||||||
|
}
|
||||||
6
packages/osr-profiles/sync/.osr-sync-json.json
Normal file
6
packages/osr-profiles/sync/.osr-sync-json.json
Normal file
@ -0,0 +1,6 @@
|
|||||||
|
{
|
||||||
|
"debug": false,
|
||||||
|
"matching": [
|
||||||
|
"**/*.json"
|
||||||
|
]
|
||||||
|
}
|
||||||
9
packages/osr-profiles/sync/.osr-sync-module.json
Normal file
9
packages/osr-profiles/sync/.osr-sync-module.json
Normal file
@ -0,0 +1,9 @@
|
|||||||
|
{
|
||||||
|
"debug": false,
|
||||||
|
"matching": [
|
||||||
|
"**/*",
|
||||||
|
"!./.git/**",
|
||||||
|
"!./node_modules/**",
|
||||||
|
"!./_MACOSX/**"
|
||||||
|
]
|
||||||
|
}
|
||||||
27
packages/osr-profiles/sync/.osr-sync-osr-machine.json
Normal file
27
packages/osr-profiles/sync/.osr-sync-osr-machine.json
Normal file
@ -0,0 +1,27 @@
|
|||||||
|
{
|
||||||
|
"debug": false,
|
||||||
|
"matching": [
|
||||||
|
"*.json",
|
||||||
|
"*.md",
|
||||||
|
"*.yaml",
|
||||||
|
"*.csv",
|
||||||
|
"*.xls",
|
||||||
|
"*.xlsx",
|
||||||
|
"*.txt",
|
||||||
|
"**/cad/**",
|
||||||
|
"**/laser/**",
|
||||||
|
"**/media/gallery/**",
|
||||||
|
"**/media/community/**",
|
||||||
|
"**/media/build/**",
|
||||||
|
"**/resources/**",
|
||||||
|
"**/firmware/**",
|
||||||
|
"**/production/**",
|
||||||
|
"**/media/**",
|
||||||
|
"**/drawings/**",
|
||||||
|
"**/renderings/**",
|
||||||
|
"!./.git/**",
|
||||||
|
"!./node_modules/**",
|
||||||
|
"!./_MACOSX/**",
|
||||||
|
"!./.*/**"
|
||||||
|
]
|
||||||
|
}
|
||||||
28
packages/osr-profiles/sync/.osr-sync-public.json
Normal file
28
packages/osr-profiles/sync/.osr-sync-public.json
Normal file
@ -0,0 +1,28 @@
|
|||||||
|
{
|
||||||
|
"debug": false,
|
||||||
|
"matching": [
|
||||||
|
"*.json",
|
||||||
|
"*.md",
|
||||||
|
"*.yaml",
|
||||||
|
"*.csv",
|
||||||
|
"*.xls",
|
||||||
|
"*.xlsx",
|
||||||
|
"*.txt",
|
||||||
|
"**/cad*/**",
|
||||||
|
"**/laser*/**",
|
||||||
|
"**/media/gallery/**",
|
||||||
|
"**/media/community/**",
|
||||||
|
"**/media/build/**",
|
||||||
|
"**/resources/**",
|
||||||
|
"**/firmware/**",
|
||||||
|
"**/production/**",
|
||||||
|
"**/media/**/*",
|
||||||
|
"**/drawings/**",
|
||||||
|
"**/renderings/**",
|
||||||
|
"!./.git/**",
|
||||||
|
"!./node_modules/**",
|
||||||
|
"!./_MACOSX/**",
|
||||||
|
"!*.arw",
|
||||||
|
"!./.*/**"
|
||||||
|
]
|
||||||
|
}
|
||||||
Loading…
Reference in New Issue
Block a user