74 lines
2.3 KiB
C++
74 lines
2.3 KiB
C++
/***************************************************************************
|
|
* Sming port of example from Adafruit_BME280_Library
|
|
|
|
This is a library for the BME280 humidity, temperature & pressure sensor
|
|
|
|
Designed specifically to work with the Adafruit BME280 Breakout
|
|
----> http://www.adafruit.com/products/2650
|
|
|
|
These sensors use I2C or SPI to communicate, 2 or 4 pins are required
|
|
to interface. The device's I2C address is either 0x76 or 0x77.
|
|
|
|
Adafruit invests time and resources providing this open source code,
|
|
please support Adafruit andopen-source hardware by purchasing products
|
|
from Adafruit!
|
|
|
|
Written by Limor Fried & Kevin Townsend for Adafruit Industries.
|
|
BSD license, all text above must be included in any redistribution
|
|
See the LICENSE file for details.
|
|
***************************************************************************/
|
|
|
|
#include <SmingCore.h>
|
|
#include <Adafruit_BME280.h>
|
|
#include <Wire.h>
|
|
|
|
#define SEALEVELPRESSURE_HPA (1013.25)
|
|
|
|
namespace
|
|
{
|
|
Adafruit_BME280 bme;
|
|
SimpleTimer procTimer;
|
|
|
|
// Will use default pins for selected architecture. You can override values here
|
|
// #define SDA 4
|
|
// #define SCL 5
|
|
|
|
void printValues()
|
|
{
|
|
Serial << _F("Temperature = ") << bme.readTemperature() << " °C" << endl;
|
|
Serial << _F("Pressure = ") << bme.readPressure() / 100.0F << " hPa" << endl;
|
|
Serial << _F("Approx. Altitude = ") << bme.readAltitude(SEALEVELPRESSURE_HPA) << " m" << endl;
|
|
Serial << _F("Humidity = ") << bme.readHumidity() << " %" << endl;
|
|
Serial.println();
|
|
}
|
|
|
|
} // namespace
|
|
|
|
void init()
|
|
{
|
|
Serial.begin(SERIAL_BAUD_RATE); // 115200 by default
|
|
Serial.systemDebugOutput(true); // Enable/disable debug output
|
|
|
|
Serial.println(_F("BME280 test"));
|
|
|
|
#ifdef SDA
|
|
Wire.pins(SDA, SCL);
|
|
#endif
|
|
|
|
if(!bme.begin()) { // if(!bme.begin(0x76, &Wire)) { if you need a specific address
|
|
Serial.println(_F("Could not find a valid BME280 sensor, check wiring, address, sensor ID!"));
|
|
Serial << _F("SensorID was: 0x") << String(bme.sensorID(), HEX) << endl;
|
|
Serial << _F(" ID of 0xFF probably means a bad address, a BMP 180 or BMP 085\r\n"
|
|
" ID of 0x56-0x58 represents a BMP 280,\r\n"
|
|
" ID of 0x60 represents a BME 280.\r\n"
|
|
" ID of 0x61 represents a BME 680.\r\n");
|
|
return;
|
|
}
|
|
|
|
Serial.println(_F("-- Default Test --"));
|
|
|
|
Serial.println();
|
|
|
|
procTimer.initializeMs<3000>(printValues).start();
|
|
}
|