436 lines
17 KiB
JSON
436 lines
17 KiB
JSON
{
|
|
"AP Gateway": "AP Gateway",
|
|
"AP IP Address": "AP IP Address",
|
|
"AP Password": "AP Password",
|
|
"AP SSID": "AP SSID",
|
|
"AP Subnet Mask": "AP Subnet Mask",
|
|
"API URL": "API URL",
|
|
"AUTO": "AUTO",
|
|
"AUTO MULTI": "AUTO MULTI",
|
|
"AUTO MULTI BALANCED": "AUTO MULTI BALANCED",
|
|
"AUTO_MULTI": "AUTO_MULTI",
|
|
"AUTO_MULTI_BALANCED": "AUTO_MULTI_BALANCED",
|
|
"AUTO_TIMEOUT": "AUTO_TIMEOUT",
|
|
"Access Point (AP) Mode": "Access Point (AP) Mode",
|
|
"Add Container": "Add Container",
|
|
"Add Controller": "Add Controller",
|
|
"Add Partition": "Add Partition",
|
|
"Add Samples": "Add Samples",
|
|
"Add Slave": "Add Slave",
|
|
"Add Widget": "Add Widget",
|
|
"Add a set of sample control points to this plot": "Add a set of sample control points to this plot",
|
|
"Add all": "Add all",
|
|
"Addr:": "Addr:",
|
|
"Address Picker": "Address Picker",
|
|
"Advanced": "Advanced",
|
|
"All Stop": "All Stop",
|
|
"Amperagebudgetmanager": "Amperagebudgetmanager",
|
|
"Apply": "Apply",
|
|
"Argument 0:": "Argument 0:",
|
|
"Argument 1:": "Argument 1:",
|
|
"Argument 2 (Optional):": "Argument 2 (Optional):",
|
|
"Arguments:": "Arguments:",
|
|
"Associated Controllers:": "Associated Controllers:",
|
|
"Associated Pressure Profile (Optional)": "Associated Pressure Profile (Optional)",
|
|
"Associated Signal Plot (Optional)": "Associated Signal Plot (Optional)",
|
|
"Aux": "Aux",
|
|
"BALANCE": "BALANCE",
|
|
"BALANCE_MAX_DIFF": "BALANCE_MAX_DIFF",
|
|
"Buzzer": "Buzzer",
|
|
"Buzzer: Fast Blink": "Buzzer: Fast Blink",
|
|
"Buzzer: Long Beep/Short Pause": "Buzzer: Long Beep/Short Pause",
|
|
"Buzzer: Off": "Buzzer: Off",
|
|
"Buzzer: Slow Blink": "Buzzer: Slow Blink",
|
|
"Buzzer: Solid On": "Buzzer: Solid On",
|
|
"CE": "CE",
|
|
"COM Write": "COM Write",
|
|
"CP Description (Optional):": "CP Description (Optional):",
|
|
"CP Name (Optional):": "CP Name (Optional):",
|
|
"CSV": "CSV",
|
|
"Call Function": "Call Function",
|
|
"Call Method": "Call Method",
|
|
"Call REST API": "Call REST API",
|
|
"Cancel": "Cancel",
|
|
"Carina": "Carina",
|
|
"Cas-master-lower-cell-hdpe": "Cas-master-lower-cell-hdpe",
|
|
"Cassandra Left": "Cassandra Left",
|
|
"Cassandra Right": "Cassandra Right",
|
|
"Castor": "Castor",
|
|
"Cetus": "Cetus",
|
|
"Charts": "Charts",
|
|
"Child Profiles (Sub-plots)": "Child Profiles (Sub-plots)",
|
|
"Clear": "Clear",
|
|
"Clear All": "Clear All",
|
|
"Clear All CPs": "Clear All CPs",
|
|
"Clear Chart": "Clear Chart",
|
|
"Clear Curve to Default Ramp": "Clear Curve to Default Ramp",
|
|
"Click \"Add Container\" to start building your layout": "Click \"Add Container\" to start building your layout",
|
|
"Click \"Add Widget\" to start building your HMI": "Click \"Add Widget\" to start building your HMI",
|
|
"Coil to Write:": "Coil to Write:",
|
|
"Coils": "Coils",
|
|
"Color": "Color",
|
|
"Coma B": "Coma B",
|
|
"Commons": "Commons",
|
|
"Configure the new control point. Press Enter to confirm or Esc to cancel.": "Configure the new control point. Press Enter to confirm or Esc to cancel.",
|
|
"Configure the series to be displayed on the chart.": "Configure the series to be displayed on the chart.",
|
|
"Connect": "Connect",
|
|
"Connect to a Modbus server to see controller data.": "Connect to a Modbus server to see controller data.",
|
|
"Connect to view register data.": "Connect to view register data.",
|
|
"Connected, but no register data received yet. Waiting for data...": "Connected, but no register data received yet. Waiting for data...",
|
|
"Connects to an existing Wi-Fi network.": "Connects to an existing Wi-Fi network.",
|
|
"Containers": "Containers",
|
|
"Continue": "Continue",
|
|
"Control Points": "Control Points",
|
|
"Control Points List": "Control Points List",
|
|
"Controller Chart": "Controller Chart",
|
|
"Controller Partitions": "Controller Partitions",
|
|
"Copy \"{plotName}\" to...": "Copy \"{plotName}\" to...",
|
|
"Copy \"{profileName}\" to...": "Copy \"{profileName}\" to...",
|
|
"Copy this plot to another slot...": "Copy this plot to another slot...",
|
|
"Copy to existing slot...": "Copy to existing slot...",
|
|
"Copy to...": "Copy to...",
|
|
"Copy...": "Copy...",
|
|
"Corona": "Corona",
|
|
"Corvus": "Corvus",
|
|
"Crater": "Crater",
|
|
"Create Control Point": "Create Control Point",
|
|
"Create New Control Point": "Create New Control Point",
|
|
"Creates its own Wi-Fi network.": "Creates its own Wi-Fi network.",
|
|
"Crux": "Crux",
|
|
"Current Status": "Current Status",
|
|
"Custom Widgets": "Custom Widgets",
|
|
"DEC": "DEC",
|
|
"Dashboard": "Dashboard",
|
|
"Debug": "Debug",
|
|
"Default Pressure Profile": "Default Pressure Profile",
|
|
"Default pressure profile": "Default pressure profile",
|
|
"Delete": "Delete",
|
|
"Delete Profile": "Delete Profile",
|
|
"Delete control point": "Delete control point",
|
|
"Delta Vfd[15]": "Delta Vfd[15]",
|
|
"Description": "Description",
|
|
"Device Hostname": "Device Hostname",
|
|
"Disable All": "Disable All",
|
|
"Disabled": "Disabled",
|
|
"Disconnect": "Disconnect",
|
|
"Display Message": "Display Message",
|
|
"Download": "Download",
|
|
"Download All JSON": "Download All JSON",
|
|
"Download English Translations": "Download English Translations",
|
|
"Download JSON for {name}": "Download JSON for {name}",
|
|
"Download Plot": "Download Plot",
|
|
"Drag and resize widgets": "Drag and resize widgets",
|
|
"Duplicate Profile": "Duplicate Profile",
|
|
"Duration (hh:mm:ss)": "Duration (hh:mm:ss)",
|
|
"Duration will be synchronized with temperature profile": "Duration will be synchronized with temperature profile",
|
|
"Duration:": "Duration:",
|
|
"E.g., Quick Ramp Up": "E.g., Quick Ramp Up",
|
|
"ERROR": "ERROR",
|
|
"Edit": "Edit",
|
|
"Edit Profile": "Edit Profile",
|
|
"Edit mode: Add, move, and configure widgets": "Edit mode: Add, move, and configure widgets",
|
|
"Edit mode: Configure containers and add widgets": "Edit mode: Configure containers and add widgets",
|
|
"Editing Mode:": "Editing Mode:",
|
|
"Empty Canvas": "Empty Canvas",
|
|
"Empty Layout": "Empty Layout",
|
|
"Enable All": "Enable All",
|
|
"Enable control unavailable for {name}": "Enable control unavailable for {name}",
|
|
"Enabled": "Enabled",
|
|
"End Index": "End Index",
|
|
"Enter CP description": "Enter CP description",
|
|
"Enter CP name": "Enter CP name",
|
|
"Export": "Export",
|
|
"Export JSON": "Export JSON",
|
|
"Export to CSV": "Export to CSV",
|
|
"FINISHED": "FINISHED",
|
|
"Favorite Coils": "Favorite Coils",
|
|
"Favorite Registers": "Favorite Registers",
|
|
"Favorites": "Favorites",
|
|
"Feedback3c": "Feedback3c",
|
|
"Feedbackbuzzer": "Feedbackbuzzer",
|
|
"File name": "File name",
|
|
"Fill": "Fill",
|
|
"Filling": "Filling",
|
|
"General": "General",
|
|
"General Settings": "General Settings",
|
|
"Global Settings": "Global Settings",
|
|
"HEX": "HEX",
|
|
"HMI Edit Mode Active": "HMI Edit Mode Active",
|
|
"Hardware I/O": "Hardware I/O",
|
|
"Heating Time": "Heating Time",
|
|
"Help": "Help",
|
|
"Home": "Home",
|
|
"HomingAuto": "HomingAuto",
|
|
"HomingMan": "HomingMan",
|
|
"Hostname": "Hostname",
|
|
"ID:": "ID:",
|
|
"IDLE": "IDLE",
|
|
"INFO": "INFO",
|
|
"INITIALIZING": "INITIALIZING",
|
|
"Idle": "Idle",
|
|
"Import": "Import",
|
|
"Import JSON": "Import JSON",
|
|
"Info": "Info",
|
|
"Integrations": "Integrations",
|
|
"Interlocked": "Interlocked",
|
|
"Jammed": "Jammed",
|
|
"Joystick": "Joystick",
|
|
"LOADCELL": "LOADCELL",
|
|
"Last updated": "Last updated",
|
|
"Loadcell[20]": "Loadcell[20]",
|
|
"Loadcell[21]": "Loadcell[21]",
|
|
"Loadcell[25]": "Loadcell[25]",
|
|
"Loadcell[26]": "Loadcell[26]",
|
|
"Loading Cassandra settings...": "Loading Cassandra settings...",
|
|
"Loading network settings...": "Loading network settings...",
|
|
"Loading profiles from Modbus...": "Loading profiles from Modbus...",
|
|
"Logs": "Logs",
|
|
"Low": "Low",
|
|
"MANUAL": "MANUAL",
|
|
"MANUAL MULTI": "MANUAL MULTI",
|
|
"MANUAL_MULTI": "MANUAL_MULTI",
|
|
"MAXLOAD": "MAXLOAD",
|
|
"MAX_TIME": "MAX_TIME",
|
|
"MINLOAD": "MINLOAD",
|
|
"MULTI_TIMEOUT": "MULTI_TIMEOUT",
|
|
"Manage controller partitions.": "Manage controller partitions.",
|
|
"Manage slave devices (max 1).": "Manage slave devices (max 1).",
|
|
"Markdown": "Markdown",
|
|
"Master Configuration": "Master Configuration",
|
|
"Master Name": "Master Name",
|
|
"Max": "Max",
|
|
"Max Simultaneous": "Max Simultaneous",
|
|
"Max:": "Max:",
|
|
"Mid": "Mid",
|
|
"Min": "Min",
|
|
"Modbus": "Modbus",
|
|
"Mode": "Mode",
|
|
"Move control point down": "Move control point down",
|
|
"Move control point up": "Move control point up",
|
|
"N/A": "N/A",
|
|
"NONE": "NONE",
|
|
"Name": "Name",
|
|
"Network": "Network",
|
|
"Network Settings": "Network Settings",
|
|
"No Operation": "No Operation",
|
|
"No coils data available. Try refreshing.": "No coils data available. Try refreshing.",
|
|
"No containers yet": "No containers yet",
|
|
"No enabled profile": "No enabled profile",
|
|
"No register data available. Try refreshing.": "No register data available. Try refreshing.",
|
|
"No source found.": "No source found.",
|
|
"No widgets found": "No widgets found",
|
|
"No widgets yet": "No widgets yet",
|
|
"None": "None",
|
|
"OC": "OC",
|
|
"OFFLINE": "OFFLINE",
|
|
"OK": "OK",
|
|
"OL": "OL",
|
|
"ON": "ON",
|
|
"ONLINE": "ONLINE",
|
|
"OV": "OV",
|
|
"OVERLOAD": "OVERLOAD",
|
|
"Offset": "Offset",
|
|
"Omrone5[10]": "Omrone5[10]",
|
|
"Omrone5[11]": "Omrone5[11]",
|
|
"Omrone5[12]": "Omrone5[12]",
|
|
"Omrone5[13]": "Omrone5[13]",
|
|
"Omrone5[14]": "Omrone5[14]",
|
|
"Omrone5[15]": "Omrone5[15]",
|
|
"Omrone5[16]": "Omrone5[16]",
|
|
"Omrone5[17]": "Omrone5[17]",
|
|
"Operatorswitch": "Operatorswitch",
|
|
"PAUSED": "PAUSED",
|
|
"PID Control": "PID Control",
|
|
"PV": "PV",
|
|
"Partitions": "Partitions",
|
|
"Pause": "Pause",
|
|
"Pause Profile": "Pause Profile",
|
|
"Pending Operations": "Pending Operations",
|
|
"Phapp": "Phapp",
|
|
"Play from start": "Play from start",
|
|
"Playground": "Playground",
|
|
"Plunge": "Plunge",
|
|
"Plunger": "Plunger",
|
|
"PlungingAuto": "PlungingAuto",
|
|
"PlungingMan": "PlungingMan",
|
|
"PolyMech - Cassandra": "PolyMech - Cassandra",
|
|
"Pop-out": "Pop-out",
|
|
"Post-die-pressing": "Post-die-pressing",
|
|
"PostFlow": "PostFlow",
|
|
"Press": "Press",
|
|
"Press Cylinder": "Press Cylinder",
|
|
"Press Cylinder Controls": "Press Cylinder Controls",
|
|
"Presscylinder": "Presscylinder",
|
|
"Pressure": "Pressure",
|
|
"Pressure Profile Target Registers": "Pressure Profile Target Registers",
|
|
"Profile Curves": "Profile Curves",
|
|
"Profile Name": "Profile Name",
|
|
"Profile SP": "Profile SP",
|
|
"Profiles": "Profiles",
|
|
"Properties:": "Properties:",
|
|
"REMOTE": "REMOTE",
|
|
"RESET": "RESET",
|
|
"RTU Client Queue": "RTU Client Queue",
|
|
"RUNNING": "RUNNING",
|
|
"Real time Charting": "Real time Charting",
|
|
"Real-time Charts": "Real-time Charts",
|
|
"Record": "Record",
|
|
"Refresh Rate": "Refresh Rate",
|
|
"Register": "Register",
|
|
"Registers": "Registers",
|
|
"Remove": "Remove",
|
|
"Remove all": "Remove all",
|
|
"Remove all control points from this plot": "Remove all control points from this plot",
|
|
"Replay": "Replay",
|
|
"Reset": "Reset",
|
|
"Reset Zoom": "Reset Zoom",
|
|
"ResettingJam": "ResettingJam",
|
|
"Restart at end": "Restart at end",
|
|
"Run Action": "Run Action",
|
|
"Run this control point action now": "Run this control point action now",
|
|
"SP": "SP",
|
|
"SP CMD Addr:": "SP CMD Addr:",
|
|
"SP:": "SP:",
|
|
"STA Gateway": "STA Gateway",
|
|
"STA IP Address": "STA IP Address",
|
|
"STA Password": "STA Password",
|
|
"STA Primary DNS": "STA Primary DNS",
|
|
"STA SSID": "STA SSID",
|
|
"STA Secondary DNS": "STA Secondary DNS",
|
|
"STA Subnet Mask": "STA Subnet Mask",
|
|
"STALLED": "STALLED",
|
|
"STOPPED": "STOPPED",
|
|
"Samplesignalplot 0": "Samplesignalplot 0",
|
|
"Save": "Save",
|
|
"Save AP Settings": "Save AP Settings",
|
|
"Save All Settings": "Save All Settings",
|
|
"Save As": "Save As",
|
|
"Save Pressure Profile": "Save Pressure Profile",
|
|
"Save STA Settings": "Save STA Settings",
|
|
"Save Signal Plot": "Save Signal Plot",
|
|
"Scale": "Scale",
|
|
"Scale:": "Scale:",
|
|
"Search...": "Search...",
|
|
"Select Known Coil...": "Select Known Coil...",
|
|
"Select a control point to see its properties.": "Select a control point to see its properties.",
|
|
"Select a destination plot. The content of \"{plotName}\" will overwrite the selected plot. This action cannot be undone.": "Select a destination plot. The content of \"{plotName}\" will overwrite the selected plot. This action cannot be undone.",
|
|
"Select a destination profile. The content of \"{profileName}\" will overwrite the selected profile. This action cannot be undone.": "Select a destination profile. The content of \"{profileName}\" will overwrite the selected profile. This action cannot be undone.",
|
|
"Select a plot to overwrite": "Select a plot to overwrite",
|
|
"Select a pressure profile to associate": "Select a pressure profile to associate",
|
|
"Select a profile to overwrite": "Select a profile to overwrite",
|
|
"Select a register or coil address": "Select a register or coil address",
|
|
"Select a signal plot to associate and edit": "Select a signal plot to associate and edit",
|
|
"Select register or coil...": "Select register or coil...",
|
|
"Select registers that this pressure profile will control": "Select registers that this pressure profile will control",
|
|
"Select source...": "Select source...",
|
|
"Select type": "Select type",
|
|
"Selected child profiles will start, stop, pause, and resume with this parent profile.": "Selected child profiles will start, stop, pause, and resume with this parent profile.",
|
|
"Selected:": "Selected:",
|
|
"Send IFTTT Notification": "Send IFTTT Notification",
|
|
"Sequential Heating": "Sequential Heating",
|
|
"Sequential Heating Control": "Sequential Heating Control",
|
|
"Series": "Series",
|
|
"Series Toggles": "Series Toggles",
|
|
"Series settings": "Series settings",
|
|
"Set All": "Set All",
|
|
"Set All SP": "Set All SP",
|
|
"Set as Default": "Set as Default",
|
|
"Settings": "Settings",
|
|
"Settings...": "Settings...",
|
|
"Shortplot 70s": "Shortplot 70s",
|
|
"Show Legend": "Show Legend",
|
|
"Show PV": "Show PV",
|
|
"Show SP": "Show SP",
|
|
"Signal Control Point Details": "Signal Control Point Details",
|
|
"Signal Plot Editor": "Signal Plot Editor",
|
|
"Signal plots configuration loaded from API.": "Signal plots configuration loaded from API.",
|
|
"Signalplot 922 Slot 2": "Signalplot 922 Slot 2",
|
|
"Signalplot 923 Slot 3": "Signalplot 923 Slot 3",
|
|
"Signals": "Signals",
|
|
"Slave ID": "Slave ID",
|
|
"Slave Mode": "Slave Mode",
|
|
"Slave:": "Slave:",
|
|
"Slaves": "Slaves",
|
|
"Slot": "Slot",
|
|
"Slot:": "Slot:",
|
|
"Solenoid": "Solenoid",
|
|
"Solenoid-310": "Solenoid-310",
|
|
"Solenoid-311": "Solenoid-311",
|
|
"Source": "Source",
|
|
"Start": "Start",
|
|
"Start Index": "Start Index",
|
|
"Start PID Controllers": "Start PID Controllers",
|
|
"Start Profile": "Start Profile",
|
|
"State:": "State:",
|
|
"Station (STA) Mode": "Station (STA) Mode",
|
|
"Stop": "Stop",
|
|
"Stop PID Controllers": "Stop PID Controllers",
|
|
"Stop Profile": "Stop Profile",
|
|
"Stop and reset": "Stop and reset",
|
|
"Stop at end": "Stop at end",
|
|
"Stopped": "Stopped",
|
|
"Stopping": "Stopping",
|
|
"Switch to edit mode to add containers": "Switch to edit mode to add containers",
|
|
"Switch to edit mode to add widgets": "Switch to edit mode to add widgets",
|
|
"System Calls": "System Calls",
|
|
"System Information": "System Information",
|
|
"System Messages": "System Messages",
|
|
"Target Controllers (Registers)": "Target Controllers (Registers)",
|
|
"Temp (°C)": "Temp (°C)",
|
|
"Temperature": "Temperature",
|
|
"Temperature Control Points": "Temperature Control Points",
|
|
"Temperature Profiles": "Temperature Profiles",
|
|
"Tempprofile 912 Slot 2": "Tempprofile 912 Slot 2",
|
|
"Tempprofile 913 Slot 3": "Tempprofile 913 Slot 3",
|
|
"This action starts all PID controllers associated with the parent temperature profile.": "This action starts all PID controllers associated with the parent temperature profile.",
|
|
"This hostname is used for both STA and AP modes. Changes here will be saved with either form.": "This hostname is used for both STA and AP modes. Changes here will be saved with either form.",
|
|
"This is where you'll design and configure your HMI layouts.": "This is where you'll design and configure your HMI layouts.",
|
|
"This will permanently clear the profile \"{profileName}\" from the server. This action cannot be undone.": "This will permanently clear the profile \"{profileName}\" from the server. This action cannot be undone.",
|
|
"Time": "Time",
|
|
"Time:": "Time:",
|
|
"Timeline:": "Timeline:",
|
|
"Title (Optional)": "Title (Optional)",
|
|
"Total": "Total",
|
|
"Total Cost": "Total Cost",
|
|
"Total:": "Total:",
|
|
"Type:": "Type:",
|
|
"Unknown": "Unknown",
|
|
"Update Profile": "Update Profile",
|
|
"Upload": "Upload",
|
|
"Upload All JSON": "Upload All JSON",
|
|
"Upload JSON for {name}": "Upload JSON for {name}",
|
|
"Upload Plot": "Upload Plot",
|
|
"User Defined": "User Defined",
|
|
"Value:": "Value:",
|
|
"View": "View",
|
|
"View mode: Interact with your widgets": "View mode: Interact with your widgets",
|
|
"Visible Controllers": "Visible Controllers",
|
|
"Watched Items": "Watched Items",
|
|
"When Slave Mode is enabled, all Omron controllers will be disabled for processing.": "When Slave Mode is enabled, all Omron controllers will be disabled for processing.",
|
|
"Widget editor and drag-and-drop functionality coming soon...": "Widget editor and drag-and-drop functionality coming soon...",
|
|
"Widgets": "Widgets",
|
|
"Window (min)": "Window (min)",
|
|
"Window Offset": "Window Offset",
|
|
"Write Coil": "Write Coil",
|
|
"Write GPIO": "Write GPIO",
|
|
"Write Holding Register": "Write Holding Register",
|
|
"X-Axis": "X-Axis",
|
|
"Y-Axis Left": "Y-Axis Left",
|
|
"accel": "accel",
|
|
"auto": "auto",
|
|
"decel": "decel",
|
|
"e.g., Start Heating": "e.g., Start Heating",
|
|
"e.g., Turn on coil for pre-heating stage": "e.g., Turn on coil for pre-heating stage",
|
|
"err": "err",
|
|
"fwd": "fwd",
|
|
"in seconds": "in seconds",
|
|
"info": "info",
|
|
"none": "none",
|
|
"reset": "reset",
|
|
"reset_fault": "reset_fault",
|
|
"rev": "rev",
|
|
"run": "run",
|
|
"setup": "setup",
|
|
"stop": "stop",
|
|
"unknown": "unknown"
|
|
} |