polymech/machines-backup
Archived
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
This repository has been archived on 2025-03-06. You can view files and clone it, but cannot push or open issues or pull requests.
master
machines-backup/shredder-ext/sxd100
History
lovebird 1482509116 latest :)
2024-10-01 17:06:14 +02:00
..
media/tests latest :) 2024-10-01 17:06:14 +02:00
resources latest :) 2024-10-01 17:06:14 +02:00
templates/shared latest :) 2024-10-01 17:06:14 +02:00
_specs.xlsx latest :) 2024-10-01 17:06:14 +02:00
config.yaml latest :) 2024-10-01 17:06:14 +02:00
License.txt latest :) 2024-10-01 17:06:14 +02:00
Readme.md latest :) 2024-10-01 17:06:14 +02:00

Readme.md

Obelix Shredder

Bill of Materials - Markdown | Bill of Materials - GoogleSheet

Todos - (Rev-A)

  • Tab and Slot wrong for back panel (34_HOPPER-BACK_x1_2mm_INOX)
  • 0.2mm more clearance for stationary knifes (06_SIDEPANEL-TOP-FLANGE_x2_12mm_FERRO)
  • non-CE flange for upper hopper (37_S-HOPPER-BASE-FLANGE_x1_2mm_INOX)
  • compensate tab offset for bearing housing gauge (03_ENDPANEL-FLANGE_x4_12mm_FERRO)

Todos (Rev-B)

  • [-] Sieve tooo expensive - use stock material
  • Sieve structure 0.5mm more clearance
  • auto auto-reverse (adaptive/smart mode)
  • [-] 15% less bolts
  • 0.5mm more material for bearing housing
  • Rails for bin
  • Suction pipe interface for bin
  • 5x LED Amp feedback for CP
  • Laser cut table
  • [-] Grinder module table adapter fuckery for Idefix-Module-Rev-B
  • [-] Adjust/add for nominal sheet errors
  • Stainless/hardox config
  • Migrate electronic plunger module from Asterix
  • Migrate oil housing for gears from 4kW

Variants

  • 250x130 - 2kW
  • 350x180 - 4kW ('xl')
  • [-] 500x240 - 7kW ('xxl')
  • [-] 700 - 11kW ('xxl')

Variant - 4kW

  • Integrate Motor from cad/4kW/50_Motor/CidepaCKM77.pdf
  • Sealed gear housing for lubrication - on the other side of the chamber
    • this will be from stainless 2mm sheets, using a form to bend it
    • the caps will be TIG weld
    • should have a sight/window nut
    • seal ring fittings will be turned on the lathe
  • Increase chamber with to aprox. 300mm - (adjust to spacers/knifes)

Todos - XMax Version (2021 - Q3)

  • recalc for 11kW, approx. 16cm rotary diameter