diff --git a/components/mechanics/motion/hgh/30/172645538-7-hgh30ha/hgh30ha.txt b/components/mechanics/motion/hgh/30/172645538-7-hgh30ha/hgh30ha.txt
new file mode 100644
index 000000000..13d17cc91
--- /dev/null
+++ b/components/mechanics/motion/hgh/30/172645538-7-hgh30ha/hgh30ha.txt
@@ -0,0 +1,40 @@
+"Symbol";"Value";"Unit";
+"TraceParts.PartNumber";"90-03042020-037183";"";
+"x";"M8x25";"";
+"y";"58.6";"";
+"z";"93.99";"";
+"TraceParts.PartTitle";"HGH30HA";"";
+"REFERENCE";"HGH30HA";"";
+"p";"13.8";"";
+"q";"28";"";
+"r";"26";"";
+"s";"14";"";
+"t";"12";"";
+"u";"9";"";
+"v";"80";"";
+"w";"20";"";
+"h";"93";"";
+"i";"120.4";"";
+"j";"21.75";"";
+"k";"6";"";
+"l";"12";"";
+"m";"M8x10";"";
+"n";"8.5";"";
+"o";"9.5";"";
+"a";"45";"";
+"b";"6";"";
+"c";"16";"";
+"d";"60";"";
+"e";"40";"";
+"f";"10";"";
+"g";"60";"";
+"SUPPLIER";"HIWIN Technologies Corp.";"";
+"a1";"0.88";"";
+"b1";"0.92";"";
+"c1";"0.92";"";
+"d1";"1.16";"";
+"e1";"4.47";"";
+"DESIGN";"HGH30HA";"";
+"TraceParts.InstanceId";"90-03042020-037183EDRPYJGQIJKH92ZJVCCZH1QJ1";"";
+"TraceParts.PartVersion";"1.0.1";"";
+"TraceParts.PartLanguage";"en";"";
diff --git a/components/shared/electronics/enclosures/vintage-vertical-edc/laser/612_SidePanel-Data-4CH_x2_1mm_INOX.DXF b/components/shared/electronics/enclosures/vintage-vertical-edc/laser/612_SidePanel-Data-4CH_x2_1mm_INOX.DXF
index a757f6f8a..5d479b91b 100644
--- a/components/shared/electronics/enclosures/vintage-vertical-edc/laser/612_SidePanel-Data-4CH_x2_1mm_INOX.DXF
+++ b/components/shared/electronics/enclosures/vintage-vertical-edc/laser/612_SidePanel-Data-4CH_x2_1mm_INOX.DXF
@@ -445,19 +445,19 @@ $SKPOLY
   9
 $TDCREATE
  40
-2460931.558523785
+2460972.699456366
   9
 $TDUCREATE
  40
-2460931.475190452
+2460972.616123033
   9
 $TDUPDATE
  40
-2460931.558536215
+2460972.699468704
   9
 $TDUUPDATE
  40
-2460931.475202882
+2460972.616135371
   9
 $TDINDWG
  40
@@ -885,7 +885,7 @@ $PSTYLEMODE
   9
 $FINGERPRINTGUID
   2
-{bdf17b16-ab07-48a6-8b9f-7116dcc27fc7}
+{4b455472-b23d-4b6d-bc5d-1cb70144ad9b}
   9
 $VERSIONGUID
   2
@@ -1837,11 +1837,11 @@ AcDbCircle
  10
 22.0
  20
-60.2727312473
+52.5
  30
 0.0
  40
-8.150000000000002
+8.15
   0
 CIRCLE
   5
@@ -1863,7 +1863,7 @@ AcDbCircle
  10
 22.0
  20
-25.2727312473
+17.5
  30
 0.0
  40
@@ -1889,11 +1889,11 @@ AcDbCircle
  10
 -22.0
  20
-25.2727312473
+17.5
  30
 0.0
  40
-8.150000000000002
+8.15
   0
 CIRCLE
   5
@@ -1941,7 +1941,7 @@ AcDbCircle
  10
 -22.0
  20
-60.2727312473
+52.5
  30
 0.0
  40
@@ -2611,9 +2611,9 @@ zx
  40
 0.0
  41
-2460931.475190452
+2460972.616123033
  42
-2460931.475202882
+2460972.616135371
   1
 
  90
diff --git a/sheetpress/components/900_Moulds/650x650-15x/readme.md b/sheetpress/components/900_Moulds/650x650-15x/readme.md
index 0a7f964c6..ed4f09175 100644
--- a/sheetpress/components/900_Moulds/650x650-15x/readme.md
+++ b/sheetpress/components/900_Moulds/650x650-15x/readme.md
@@ -1,31 +1,45 @@
 ## Mould - Cassandra - 650
 
+### 
+
 ### General
 
 width : 640
 mould frame thickness : 15mm - square
 
-### Top / Bottom Sheet 
+### 
+
+### Top / Bottom Sheet
+
+
 
 thickness : 2mm
 
+### 
+
 ### Flanges
 
-- 3 each side, for M6 bolts, M7 bore (tolerance / clearance due to bending)
-- slot to ease hand bending
-- flange width : 20mm
-- distribution : 25% from the corner, one at the center
-- the upper sheet has its flanges offset - choose a good distance :)
+* 3 each side, for M6 bolts, M7 bore (tolerance / clearance due to bending)
+* slot to ease hand bending
+* flange width : 20mm
+* distribution : 25% from the corner, one at the center
+* the upper sheet has its flanges offset - choose a good distance :)
+
+### 
 
 ### Mould Frame
 
+### 
+
 ### holes - sides
 
-- one for assembly, each end
-- next, 35mm away : bearing mounts (M8 bolts), each end
-- flange mounts, M6
-- venting / overflow holes, closable, M8 bolts, also 2 each end
+* one for assembly, each end
+* next, 35mm away : bearing mounts (M8 bolts), each end
+* flange mounts, M6
+* venting / overflow holes, closable, M8 bolts, also 2 each end
+
+### 
 
 ### holes - top
 
-- we will use M8 dowel pins to stack up mould frames, we'd need one pin in every corner, but also one in the center
+* we will use M8 dowel pins to stack up mould frames, we'd need one pin in every corner, but also one in the center