"Table-Width"= 1300
"Table-Depth"= 520
"Support-Rod-Offset"= 30
"Support-Rod-Diameter"= 30.5
"Support-Rod-Diamter-Small"= 20
"Support-Rod-X-Offset" = 30
"Support-Rod-Y-Offset" = 200
"D1@Sketch1"="Table-Width"
"D2@Sketch1"="Table-Depth"
"D1@Sketch3"="Support-Rod-Offset"
"D2@Sketch3"="Support-Rod-Diameter"
"D5@Sketch3"="Support-Rod-Diamter-Small"