## Shrinkage - [Source](https://omnexus.specialchem.com/polymer-property/shrinkage) | Polymer Name | Min Value (%) | Max Value (%) | |----------------------------------------------------------------------------------------|---------------|---------------| | ABS - Acrylonitrile Butadiene Styrene | 0.70 | 1.60 | | ABS Flame Retardant | 0.30 | 0.80 | | ABS High Heat | 0.40 | 0.90 | | ABS High Impact | 0.40 | 0.90 | | ABS/PC Blend - Acrylonitrile Butadiene Styrene/Polycarbonate Blend | 0.50 | 0.70 | | ABS/PC Blend 20% Glass Fiber | 0.20 | 0.30 | | ABS/PC Flame Retardant | 0.30 | 0.60 | | Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) | 0.80 | 1.00 | | Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) | 0.80 | 1.00 | | Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) | 1.00 | 1.20 | | Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) | 1.00 | 1.20 | | Amorphous TPI, Moderate Heat, Transparent | 0.50 | 0.70 | | Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) | 0.50 | 0.70 | | Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) | 0.50 | 0.70 | | Amorphous TPI, Moderate Heat, Transparent (Powder form) | 0.50 | 0.70 | | ASA - Acrylonitrile Styrene Acrylate | 0.40 | 0.70 | | ASA/PC Blend - Acrylonitrile Styrene Acrylate/Polycarbonate Blend | 0.30 | 0.70 | | ASA/PC Flame Retardant | 0.40 | 0.80 | | ASA/PVC Blend - Acrylonitrile Styrene Acrylate/Polyvinyl Chloride Blend | 0.30 | 0.70 | | CA - Cellulose Acetate | 0.30 | 1.00 | | CAB - Cellulose Acetate Butyrate | 0.20 | 0.90 | | Celllulose Diacetate-Pearlescent Films | 1.00 | 1.50 | | Celllulose Diacetate-Matt Film | 1.00 | 1.50 | | CP - Cellulose Proprionate | 0.10 | 0.90 | | CPVC - Chlorinated Polyvinyl Chloride | 0.30 | 0.70 | | ETFE - Ethylene Tetrafluoroethylene | 3.00 | 4.00 | | EVA - Ethylene Vinyl Acetate | 0.40 | 3.50 | | FEP - Fluorinated Ethylene Propylene | 3.00 | 6.00 | | HDPE - High Density Polyethylene | 1.50 | 4.00 | | HIPS - High Impact Polystyrene | 0.20 | 0.80 | | HIPS Flame Retardant V0 | 0.30 | 0.60 | | LCP - Liquid Crystal Polymer | 0.10 | 0.60 | | LCP Carbon Fiber-reinforced | 0.10 | 0.50 | | LCP Glass Fiber-reinforced | 0.10 | 0.40 | | LCP Mineral-filled | 0.10 | 0.50 | | LDPE - Low Density Polyethylene | 2.00 | 4.00 | | LLDPE - Linear Low Density Polyethylene | 2.00 | 2.50 | | MABS - Transparent Acrylonitrile Butadiene Styrene | 0.40 | 0.70 | | PA 11 - (Polyamide 11) 30% Glass fiber reinforced | 0.50 | 0.50 | | PA 11, Conductive | 0.70 | 2.00 | | PA 11, Flexible | 1.40 | 1.80 | | PA 11, Rigid | 0.70 | 2.00 | | PA 12 (Polyamide 12), Conductive | 0.70 | 2.00 | | PA 12, Fiber-reinforced | 0.70 | 2.00 | | PA 12, Flexible | 0.70 | 2.00 | | PA 12, Glass Filled | 0.70 | 2.00 | | PA 12, Rigid | 0.70 | 2.00 | | PA 46 - Polyamide 46 | 1.50 | 2.00 | | PA 46, 30% Glass Fiber | 0.30 | 1.30 | | PA 6 - Polyamide 6 | 0.50 | 1.50 | | PA 6-10 - Polyamide 6-10 | 1.00 | 1.30 | | PA 66 - Polyamide 6-6 | 0.70 | 3.00 | | PA 66, 30% Glass Fiber | 0.50 | 0.50 | | PA 66, 30% Mineral filled | 0.60 | 1.00 | | PA 66, Impact Modified, 15-30% Glass Fiber | 0.20 | 0.60 | | PA 66, Impact Modified | 1.20 | 3.00 | | PAI - Polyamide-Imide | 0.60 | 1.00 | | PAI, 30% Glass Fiber | 0.10 | 0.30 | | PAI, Low Friction | 0.10 | 0.50 | | PAN - Polyacrylonitrile | 0.20 | 0.50 | | PAR - Polyarylate | 0.90 | 1.20 | | PARA (Polyarylamide), 30-60% glass fiber | 0.10 | 0.40 | | PBT - Polybutylene Terephthalate | 0.50 | 2.20 | | PBT, 30% Glass Fiber | 0.20 | 1.00 | | PC (Polycarbonate) 20-40% Glass Fiber | 0.10 | 0.50 | | PC (Polycarbonate) 20-40% Glass Fiber Flame Retardant | 0.10 | 0.50 | | PC - Polycarbonate, high heat | 0.70 | 1.00 | | PC/PBT Blend - Polycarbonate/Polybutylene Terephthalate Blend | 0.60 | 1.10 | | PCTFE - Polymonochlorotrifluoroethylene | 0.50 | 1.50 | | PE - Polyethylene30% Glass Fiber | 0.20 | 0.60 | | PEEK - Polyetheretherketone | 1.20 | 1.50 | | PEEK 30% Carbon Fiber-reinforced | 0.00 | 0.50 | | PEEK 30% Glass Fiber-reinforced | 0.40 | 0.80 | | PEI - Polyetherimide | 0.70 | 0.80 | | PEI, 30% Glass Fiber-reinforced | 0.20 | 0.40 | | PEI, Mineral Filled | 0.50 | 0.70 | | PEKK (Polyetherketoneketone), Low Crystallinity Grade | 0.004 | 0.005 | | PESU - Polyethersulfone | 0.60 | 0.70 | | PESU 10-30% glass fiber | 0.20 | 0.30 | | PET - Polyethylene Terephthalate | 0.20 | 3.00 | | PET, 30% Glass Fiber-reinforced | 0.20 | 1.00 | | PET, 30/35% Glass Fiber-reinforced, Impact Modified | 0.20 | 0.90 | | PETG - Polyethylene Terephthalate Glycol | 0.20 | 1.00 | | PE-UHMW - Polyethylene -Ultra High Molecular Weight | 4.00 | 4.00 | | PFA - Perfluoroalkoxy | 3.00 | 5.00 | | PHB - Polyhydroxybutyrate | 1.20 | 1.60 | | PI - Polyimide | 0.20 | 1.20 | | PLA,injection molding | 0.30 | 0.50 | | PMMA - Polymethylmethacrylate/Acrylic | 0.20 | 0.80 | | PMMA (Acrylic) High Heat | 0.20 | 0.80 | | PMMA (Acrylic) Impact Modified | 0.20 | 0.80 | | PMP - Polymethylpentene | 1.60 | 2.10 | | PMP 30% Glass Fiber-reinforced | 0.30 | 1.20 | | PMP Mineral Filled | 1.40 | 1.70 | | Polyamide 66 (Nylon 66)/Carbon Fiber, Long, 30 % Filler by Weight | 0.30 | 0.30 | | Polyamide 66 (Nylon 66)/Carbon Fiber, Long, 40 % Filler by Weight | 0.30 | 0.30 | | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 40 % Filler by Weight | 0.30 | 0.30 | | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 50 % Filler by Weight | 0.30 | 0.30 | | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 60 % Filler by Weight | 0.30 | 0.30 | | PP Homopolymer, Long Glass Fiber, 30% Filler by Weight | 0.40 | 0.40 | | PP Homopolymer, Long Glass Fiber, 40% Filler by Weight | 0.30 | 0.30 | | PP Homopolymer, Long Glass Fiber, 50% Filler by Weight | 0.30 | 0.30 | | POM - Polyoxymethylene (Acetal) | 1.80 | 2.50 | | POM (Acetal) Impact Modified | 1.00 | 2.50 | | POM (Acetal) Low Friction | 1.80 | 3.00 | | POM (Acetal) Mineral Filled | 1.50 | 2.00 | | PP - Polypropylene 10-20% Glass Fiber | 0.30 | 1.00 | | PP, 10-40% Mineral Filled | 0.60 | 1.40 | | PP, 10-40% Talc Filled | 0.90 | 1.40 | | PP, 30-40% Glass Fiber-reinforced | 0.01 | 1.00 | | PP (Polypropylene) Copolymer | 2.00 | 3.00 | | PP (Polypropylene) Homopolymer | 1.00 | 3.00 | | PP, Impact Modified | 2.00 | 3.00 | | PPA - Polyphthalamide | 1.50 | 2.20 | | PPA – 30% Mineral | 1.00 | 1.20 | | PPA, 33% Glass Fiber-reinforced | 0.50 | 0.70 | | PPA, 33% Glass Fiber-reinforced – High Flow | 0.74 | 0.76 | | PPA, 45% Glass Fiber-reinforced | 0.10 | 0.30 | | PPE - Polyphenylene Ether | 0.50 | 0.80 | | PPE, 30% Glass Fiber-reinforced | 0.10 | 0.40 | | PPE, Flame Retardant | 0.60 | 1.00 | | PPE, Impact Modified | 0.60 | 1.00 | | PPE, Mineral Filled | 0.30 | 0.70 | | PPS - Polyphenylene Sulfide | 0.60 | 1.40 | | PPS, 20-30% Glass Fiber-reinforced | 0.20 | 0.50 | | PPS, 40% Glass Fiber-reinforced | 0.20 | 0.50 | | PPS, Conductive | 0.30 | 1.00 | | PPS, Glass fiber & Mineral-filled | 0.30 | 0.70 | | PPSU - Polyphenylene Sulfone | 0.70 | 0.70 | | PS (Polystyrene) 30% glass fiber | 0.20 | 0.20 | | PS (Polystyrene) Crystal | 0.10 | 0.70 | | PS, High Heat | 0.20 | 0.70 | | PSU - Polysulfone | 0.70 | 0.70 | | PSU, 30% Glass finer-reinforced | 0.10 | 0.60 | | PSU Mineral Filled | 0.40 | 0.50 | | PTFE - Polytetrafluoroethylene | 3.00 | 6.00 | | PTFE, 25% Glass Fiber-reinforced | 1.80 | 2.00 | | PVC (Polyvinyl Chloride), 20% Glass Fiber-reinforced | 0.10 | 0.20 | | PVC, Plasticized | 0.20 | 4.00 | | PVC, Plasticized Filled | 0.80 | 5.00 | | PVC Rigid | 0.10 | 0.60 | | PVDC - Polyvinylidene Chloride | 0.50 | 2.50 | | PVDF - Polyvinylidene Fluoride | 2.00 | 4.00 | | SAN - Styrene Acrylonitrile | 0.30 | 0.70 | | SAN, 20% Glass Fiber-reinforced | 0.10 | 0.30 | | SMA - Styrene Maleic Anhydride | 0.40 | 0.80 | | SMA, 20% Glass Fiber-reinforced | 0.20 | 0.30 | | SMA, Flame Retardant V0 | 0.50 | 0.50 | | TPS, Injection General Purpose | 0.60 | 1.50 | | TPS, Water Resistant | 0.60 | 0.90 | | XLPE - Crosslinked Polyethylene | 0.70 | 5.00 | - [Source](https://upmold.com/plastic-shrinkage-rate-chart/) | Name of the polymer | Explicit name of the polymer | Min Value(%) | Max Value(%) | |----------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------|--------------|--------------| | ABS | Acrylonitrile-Butadiene Styrene | 0.700 | 1.600 | | ABS FR | Acrylonitrile-Butadiene Styrene flame retardant | 0.300 | 0.800 | | ABS High Heat | Acrylonitrile-Butadiene Styrene High Heat | 0.400 | 0.900 | | ABS High Impact | Acrylonitrile-Butadiene Styrene High Impact | 0.400 | 0.900 | | ABS/PC | Acrylonitrile-Butadiene Styrene/Polycarbonate | 0.500 | 0.700 | | ABS/PC 20% GF | Acrylonitrile-Butadiene Styrene/Polycarbonate 20% glass fiber | 0.200 | 0.300 | | ABS/PC FR | Acrylonitrile-Butadiene Styrene/Polycarbonate flame retardant | 0.300 | 0.600 | | Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) | Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) | 0.800 | 1.000 | | Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) | Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) | 0.800 | 1.000 | | Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) | Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) | 1.000 | 1.200 | | Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) | Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) | 1.000 | 1.200 | | Amorphous TPI, Moderate Heat, Transparent | Amorphous TPI, Moderate Heat, Transparent | 0.500 | 0.700 | | Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) | Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) | 0.500 | 0.700 | | Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) | Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) | 0.500 | 0.700 | | Amorphous TPI, Moderate Heat, Transparent (Powder form) | Amorphous TPI, Moderate Heat, Transparent (Powder form) | 0.500 | 0.700 | | ASA | Acrylonitrile Styrene Acrylate | 0.400 | 0.700 | | ASA/PC | Acrylonitrile Styrene Acrylate/Polycarbonate | 0.300 | 0.700 | | ASA/PC FR | Acrylonitrile Styrene Acrylate/Polycarbonate flame retardant | 0.400 | 0.800 | | ASA/PVC | Acrylonitrile Styrene Acrylate/Polyvinyl Chloride | 0.300 | 0.700 | | CA – Cellulose Acetate | Cellulose Acetate | 0.300 | 1.000 | | CAB – Cellulose Acetate Butyrate | Cellulose Acetate Butyrate | 0.200 | 0.900 | | Celllulose Diacetate- Pearlescent Films | Celllulose Diacetate- Pearlescent Films | 1.000 | 1.500 | | Celllulose Diacetate-Matt Film | Celllulose Diacetate-Matt Film | 1.000 | 1.500 | | CP – Cellulose Proprionate | Cellulose Proprionate | 0.100 | 0.900 | | CPVC – Chlorinated Polyvinyl Chloride | CPVC – Chlorinated Polyvinyl Chloride | 0.300 | 0.700 | | ETFE | Ethylene Tetrafluoroethylene | 3.000 | 4.000 | | EVA | Ethylene Vinyl Acetate | 0.400 | 3.500 | | FEP | Fluorinated Ethylene Propylene | 3.000 | 6.000 | | HDPE – High Density Polyethylene | HDPE – High Density Polyethylene | 1.500 | 4.000 | | HIPS – High Impact Polystyrene | HIPS – High Impact Polystyrene | 0.200 | 0.800 | | HIPS FR V0 | High Impact Polystyrene flame retardant V0 | 0.300 | 0.600 | | LCP | Liquid Crystal Polymer | 0.100 | 0.600 | | LCP CF | Liquid Crystal Polymer carbon fiber | 0.100 | 0.500 | | LCP GF | Liquid Crystal Polymer glass fiber | 0.100 | 0.400 | | LCP MINERAL | Liquid Crystal Polymer mineral | 0.100 | 0.500 | | LDPE – Low Density Polyethylene | LDPE – Low Density Polyethylene | 2.000 | 4.000 | | LLDPE – Linear Low Density Polyethylene | LLDPE – Linear Low Density Polyethylene | 2.000 | 2.500 | | MABS | Transparent Acrylonitrile Butadiene Styrene | 0.400 | 0.700 | | PA 11 30% Glass fiber reinforced | Polyamide 11 30% Glass fiber reinforced | 0.500 | 0.500 | | PA 11 conductive | Polyamide 11 conductive | 0.700 | 2.000 | | PA 11 flexible | Polyamide 11 flexible | 1.400 | 1.800 | | PA 11 rigid | Polyamide 11 rigid | 0.700 | 2.000 | | PA 12 conductive | Polyamide 12 conductive | 0.700 | 2.000 | | PA 12 fiber reinforced | Polyamide 12 fiber reinforced | 0.700 | 2.000 | | PA 12 flexible | Polyamide 12 flexible | 0.700 | 2.000 | | PA 12 glass filled | Polyamide 12 glass filled | 0.700 | 2.000 | | PA 12 rigid | Polyamide 12 rigid | 0.700 | 2.000 | | PA 46 | Polyamide 46 | 1.500 | 2.000 | | PA 46 30% GF | Polyamide 46 30% glass fiber | 0.300 | 1.300 | | PA 6 | Polyamide 6 | 0.500 | 1.500 | | PA 6-10 | Polyamide 6-10 | 1.000 | 1.300 | | PA 66 | Polyamide 6-6 | 0.700 | 3.000 | | PA 66 30% GF | Polyamide 6-6 30% glass fiber | 0.500 | 0.500 | | PA 66 30% mineral filled | Polyamide 6-6 30% mineral filled | 0.600 | 1.000 | | PA 66 IM 15-30% GF | Polyamide 6-6 impact modified 15-30% glass fiber | 0.200 | 0.600 | | PA 66 impact modified | Polyamide 6-6 impact modified | 1.200 | 3.000 | | PAI | Polyamide-Imide | 0.600 | 1.000 | | PAI 30% GF | Polyamide-Imide 30% glass fiber | 0.100 | 0.300 | | PAI low friction | Polyamide-Imide low friction | 0.100 | 0.500 | | PAN | Polyacrylonitrile | 0.200 | 0.500 | | PAR | Polyarylate | 0.900 | 1.200 | | PARA 30-60% GF | Polyarylamide 30-60% glass fiber | 0.100 | 0.400 | | PBT | Polybutylene Terephthalate | 0.500 | 2.200 | | PBT 30% GF | Polybutylene Terephthalate 30% glass fiber | 0.200 | 1.000 | | PC 20-40% GF | Polycarbonate 20-40% glass fiber | 0.100 | 0.500 | | PC 20-40% GF FR | Polycarbonate 20-40% glass fiber flame retardant | 0.100 | 0.500 | | PC high heat | Polycarbonate high heat | 0.700 | 1.000 | | PC/PBT | Polycarbonate/Polybutylene Terephthalate blend | 0.600 | 1.100 | | PCTFE | Polymonochlorotrifluoroethylene | 0.500 | 1.500 | | PE 30% GF | Polyethylene 30% glass fiber | 0.200 | 0.600 | | PEEK | Polyetheretherketone | 1.200 | 1.500 | | PEEK 30% CF | Polyetheretherketone 30% carbon fiber | 0.000 | 0.500 | | PEEK 30% GF | Polyetheretherketone 30% glass fiber | 0.400 | 0.800 | | PEI | Polyetherimide | 0.700 | 0.800 | | PEI 30% GF | Polyetherimide 30% glass fiber | 0.200 | 0.400 | | PEI mineral filled | Polyetherimide mineral filled | 0.500 | 0.700 | | PEKK– Low cristallinity grade | Polyetherketoneketone– Low cristallinity grade | 0.004 | 0.005 | | PESU | Polyethersulfone | 0.600 | 0.700 | | PESU 10-30% GF | Polyethersulfone 10-30% glass fiber | 0.200 | 0.300 | | PET | Polyethylene Terephtalate | 0.200 | 3.000 | | PET 30% GF | Polyethylene Terephtalate 30% glass fiber | 0.200 | 1.000 | | PET 30/35% GF Impact modified | Polyethylene Terephtalate 30/35% glass fiber impact modified | 0.200 | 0.900 | | PET G | Polyethylene Terephtalate Glycol | 0.200 | 1.000 | | PE-UHMW | Polyethylene -Ultra High Molecular Weight | 4.000 | 4.000 | | PFA | Perfluoroalkoxy | 3.000 | 5.000 | | PHB – Polyhydroxybutyrate | Polyhydroxybutyrate | 1.200 | 1.600 | | PI | Polyimide | 0.200 | 1.200 | | PLA-injection molding | Polylactide-injection molding | 0.300 | 0.500 | | PMMA | Polymethylmethacrylate (Acrylic) | 0.200 | 0.800 | | PMMA high heat | Polymethylmethacrylate (Acrylic) high heat | 0.200 | 0.800 | | PMMA Impact modified | Polymethylmethacrylate (Acrylic) impact modified | 0.200 | 0.800 | | PMP | Polymethylpentene | 1.600 | 2.100 | | PMP 30% GF | Polymethylpentene 30% glass fiber | 0.300 | 1.200 | | PMP mineral filled | Polymethylpentene mineral filled | 1.400 | 1.700 | | Polyamide 66 (Nylon 66)/Carbon Fiber, Long, 30 % Filler by Weight | Polyamide 66 (Nylon 66)/Carbon Fiber, Long, 30 % Filler by Weight | 0.300 | 0.300 | | Polyamide 66 (Nylon 66)/Carbon Fiber, Long, 40 % Filler by Weight | Polyamide 66 (Nylon 66)/Carbon Fiber, Long, 40 % Filler by Weight | 0.300 | 0.300 | | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 40 % Filler by Weight | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 40 % Filler by Weight | 0.300 | 0.300 | | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 40 % Filler by Weight | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 40 % Filler by Weight | 0.300 | 0.300 | | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 50 % Filler by Weight | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 50 % Filler by Weight | 0.300 | 0.300 | | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 50 % Filler by Weight | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 50 % Filler by Weight | 0.300 | 0.300 | | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 60 % Filler by Weight | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 60 % Filler by Weight | 0.300 | 0.300 | | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 60 % Filler by Weight | Polyamide 66 (Nylon 66)/Glass Fiber, Long, 60 % Filler by Weight | 0.300 | 0.300 | | Polypropylene Homopolymer (PP Homopolymer)/Glass Fiber, Long, 30 % Filler by Weight | Polypropylene Homopolymer (PP Homopolymer)/Glass Fiber, Long, 30 % Filler by Weight | 0.400 | 0.400 | | Polypropylene Homopolymer (PP Homopolymer)/Glass Fiber, Long, 40 % Filler by Weight | Polypropylene Homopolymer (PP Homopolymer)/Glass Fiber, Long, 40 % Filler by Weight | 0.300 | 0.300 | | Polypropylene Homopolymer (PP Homopolymer)/Glass Fiber, Long, 40 % Filler by Weight | Polypropylene Homopolymer (PP Homopolymer)/Glass Fiber, Long, 40 % Filler by Weight | 0.300 | 0.300 | | Polypropylene Homopolymer (PP Homopolymer)/Glass Fiber, Long, 50 % Filler by Weight | Polypropylene Homopolymer (PP Homopolymer)/Glass Fiber, Long, 50 % Filler by Weight | 0.300 | 0.300 | | Polypropylene Homopolymer (PP Homopolymer)/Glass Fiber, Long, 50 % Filler by Weight | Polypropylene Homopolymer (PP Homopolymer)/Glass Fiber, Long, 50 % Filler by Weight | 0.300 | 0.300 | | POM | Polyoxymethylene (acetal) | 1.800 | 2.500 | | POM impact modified | Polyoxymethylene (acetal) impact modified | 1.000 | 2.500 | | POM low friction | Polyoxymethylene (acetal) low friction | 1.800 | 3.000 | | POM mineral filled | Polyoxymethylene (acetal) mineral filled | 1.500 | 2.000 | | PP 10-20% GF | Polypropylene 10-20% glass fiber | 0.300 | 1.000 | | PP 10-40% mineral filled | Polypropylene 10-40% mineral filled | 0.600 | 1.400 | | PP 10-40% TALC | Polypropylene 10-40% talc | 0.900 | 1.400 | | PP 30-40% GF | Polypropylene 30-40% glass fiber | 0.100 | 1.000 | | PP copo | Polypropylene copolymer | 2.000 | 3.000 | | PP homo | Polypropylene homopolymer | 1.000 | 3.000 | | PP impact modified | Polypropylene impact modified | 2.000 | 3.000 | | PPA | Polyphthalamide | 1.500 | 2.200 | | PPA – 30% mineral | Polyphthalamide– 30% mineral | 1.000 | 1.200 | | PPA – 33% glass fiber | Polyphthalamide – 33% glass fiber | 0.500 | 0.700 | | PPA – 33% glass fiber – high flow | Polyphthalamide– 33% glass fiber – high flow | 0.740 | 0.760 | | PPA – 45% glass fiber | Polyphthalamide– 45% glass fiber | 0.100 | 0.300 | | PPE | Polyphenylene Ether | 0.500 | 0.800 | | PPE 30% GF | Polyphenylene Ether 30% glass fiber | 0.100 | 0.400 | | PPE FR | Polyphenylene Ether flame retardant | 0.600 | 1.000 | | PPE impact modified | Polyphenylene Ether impact modified | 0.600 | 1.000 | | PPE mineral filled | Polyphenylene Ether mineral filled | 0.300 | 0.700 | | PPS | Polyphenylene Sulfide | 0.600 | 1.400 | | PPS 20-30% GF | Polyphenylene Sulfide 20-30% glass fiber | 0.200 | 0.500 | | PPS 40% GF | Polyphenylene Sulfide 40% glass fiber | 0.200 | 0.500 | | PPS conductive | Polyphenylene Sulfide conductive | 0.300 | 1.000 | | PPS GF & mineral | Polyphenylene Sulfide glass fiber & mineral | 0.300 | 0.700 | | PS 30 % GF | Polystyrene 30% glass fiber | 0.200 | 0.200 | | PS crystal | Polystyrene crystal | 0.100 | 0.700 | | PS high heat | Polystyrene high heat | 0.200 | 0.700 | | PSU | Polysulfone | 0.700 | 0.700 | | PSU 30% GF | Polysulfone 30% glass fiber | 0.100 | 0.600 | | PSU mineral filled | Polysulfone mineral filled | 0.400 | 0.500 | | PTFE | Polytetrafluoroethylene | 3.000 | 6.000 | | PTFE 25% GF | Polytetrafluoroethylene 25% glass fiber | 1.800 | 2.000 | | PVC 20% GF | Polyvinyl Chloride 20% glass fiber | 0.100 | 0.200 | | PVC plasticized | Polyvinyl Chloride plasticized | 0.200 | 4.000 | | PVC plasticized filled | Polyvinyl Chloride plasticized filled | 0.800 | 5.000 | | PVC rigid | Polyvinyl Chloride rigid | 0.100 | 0.600 | | PVDC | Polyvinylidene Chloride | 0.500 | 2.500 | | PVDF | Polyvinylidene Fluoride | 2.000 | 4.000 | | SAN | Styrene Acrylonitrile | 0.300 | 0.700 | | SAN 20% GF | Styrene Acrylonitrile 20% glass fiber | 0.100 | 0.300 | | SMA | Styrene Maleic Anhydride | 0.400 | 0.800 | | SMA 20% GF | Styrene Maleic Anhydride 20% glass fiber | 0.200 | 0.300 | | SMA FR V0 | Styrene Maleic Anhydride flame retardant V0 | 0.500 | 0.500 | | TPS-Injection General Purpose | Thermoplastic Starch GP | 0.600 | 1.500 | | TPS-Injection Water Resistant | Thermoplastic Starch WR | 0.600 | 0.900 | | XLPE – Crosslinked Polyethylene | XLPE – Crosslinked Polyethylene | 0.700 | 5.000 |