machines/shredder-ext/sxd100

Obelix Shredder

Bill of Materials - Markdown | Bill of Materials - GoogleSheet

Todos - (Rev-A)

• Tab and Slot wrong for back panel (34_HOPPER-BACK_x1_2mm_INOX)
• 0.2mm more clearance for stationary knifes (06_SIDEPANEL-TOP-FLANGE_x2_12mm_FERRO)
• non-CE flange for upper hopper (37_S-HOPPER-BASE-FLANGE_x1_2mm_INOX)
• compensate tab offset for bearing housing gauge (03_ENDPANEL-FLANGE_x4_12mm_FERRO)

Todos (Rev-B)

• [-] Sieve tooo expensive - use stock material
• Sieve structure 0.5mm more clearance
• auto auto-reverse (adaptive/smart mode)
• [-] 15% less bolts
• 0.5mm more material for bearing housing
• Rails for bin
• Suction pipe interface for bin
• 5x LED Amp feedback for CP
• Laser cut table
• [-] Grinder module table adapter fuckery for Idefix-Module-Rev-B
• [-] Adjust/add for nominal sheet errors
• Stainless/hardox config
• Migrate electronic plunger module from Asterix
• Migrate oil housing for gears from 4kW

Variants

• 250x130 - 2kW
• 350x180 - 4kW ('xl')
• [-] 500x240 - 7kW ('xxl')
• [-] 700 - 11kW ('xxl')

Variant - 4kW

• Integrate Motor from cad/4kW/50_Motor/CidepaCKM77.pdf
• Sealed gear housing for lubrication - on the other side of the chamber
  • this will be from stainless 2mm sheets, using a form to bend it
  • the caps will be TIG weld
  • should have a sight/window nut
  • seal ring fittings will be turned on the lathe
• Increase chamber with to aprox. 300mm - (adjust to spacers/knifes)

Todos - XMax Version (2021 - Q3)

• recalc for 11kW, approx. 16cm rotary diameter