diff --git a/resources/material/hdpe/assets/washed-2-stage-1-10mm/readme.md b/resources/material/hdpe/assets/washed-2-stage-1-10mm/readme.md
new file mode 100644
index 0000000..1b85e51
--- /dev/null
+++ b/resources/material/hdpe/assets/washed-2-stage-1-10mm/readme.md
@@ -0,0 +1,30 @@
+## Settings
+
+- **Mould Size**: 63cm x 63cm
+- **Mould height**: 15mm
+- **Mould sheets**: 2x polised stainless
+- **Mould release**: none
+
+- **Temp - UP**: 155
+- **Temp - DOWN**: 155
+- **Heat**: Cold Start
+
+- **Duration-Melt**: 45 min
+- **Duration-Pre-Cool**: 15 min (heater off)
+- **Duration-Cooling-Final**: 1h
+
+- **Preparation**: 1x layers: 2cm
+- **Excess**: none
+- **Method**: Mould frame, 2 passes (intial melt, die)
+
+- **Die Height**: 3mm
+- **Die Material**: steel
+- **Die Penetration**: 3mm
+- **Die Protection Sheet**: stainless, 2mm
+
+- **Thickness Error**: 0.1mm per 60cm
+- **Flatness Error**: 0.5mm per 60cm
+
+- **Final sheet thickness**: 10.5 mm
+- **Surface Quality**: good
+- **Air voids**: none