diff --git a/resources/material/pet/assets/pp-india/IMG_3989.jpg b/resources/material/pet/assets/pp-india/IMG_3989.jpg
new file mode 100644
index 0000000..2a54601
--- /dev/null
+++ b/resources/material/pet/assets/pp-india/IMG_3989.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:5cbf95f7b331ecf81f65f18fd964a896b1132ad3d1b0fecdbd8ba0089f1274e3
+size 842812
diff --git a/resources/material/pet/assets/pp-india/IMG_4066.jpg b/resources/material/pet/assets/pp-india/IMG_4066.jpg
new file mode 100644
index 0000000..7eb4e66
--- /dev/null
+++ b/resources/material/pet/assets/pp-india/IMG_4066.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:6f278c3725e1b3b1647e009336305c62c218f1112cd50edf864334b1f6c53521
+size 743581
diff --git a/resources/material/pet/assets/pp-india/IMG_4090.jpg b/resources/material/pet/assets/pp-india/IMG_4090.jpg
new file mode 100644
index 0000000..3e12dab
--- /dev/null
+++ b/resources/material/pet/assets/pp-india/IMG_4090.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:d59ad088c6c47e127d52cb4091df9835f67875932593bb6a6065bcfa2647d849
+size 550985
diff --git a/resources/material/pet/assets/pp-india/IMG_4091.jpg b/resources/material/pet/assets/pp-india/IMG_4091.jpg
new file mode 100644
index 0000000..3150e6a
--- /dev/null
+++ b/resources/material/pet/assets/pp-india/IMG_4091.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:8aaffc2b4448d36ce2fab1c5bc782f1c3b4950d319703340cbd551e0e7371203
+size 730965
diff --git a/resources/material/pet/assets/pp-india/com-thecollective.md b/resources/material/pet/assets/pp-india/com-thecollective.md
new file mode 100644
index 0000000..151b67e
--- /dev/null
+++ b/resources/material/pet/assets/pp-india/com-thecollective.md
@@ -0,0 +1,2 @@
+So, by far, the best setting I got with the current press, was 230 degrees and between 50 min and 1 hour. Maybe with your machine, you'll need less temperature and time, you will know better. For this time I was doing a 750x750x20mm frame, which felt sturdy but still brittle and with loads of bubbles.
+I have done many samples and this material doesn't seem to like the quick change from hot to cold press(it comes out in 100pieces), the best results were leaving it on the hot press turned off after the processing time, and then after a 1/1.5 hour transferring it to the cold press for another 1.5 hour, buuuuut again, maybe your machine does magic 😂