tests:hdpe:40mm

resources/material/hdpe/assets/washed-2-stage-6/readme.md

@@ -0,0 +1,30 @@
+## Settings
+
+- **Mould Size**: 43 x 35cm x 2cm
+- **Mould height**: 40mm
+- **Mould sheets**: 1x sanded stainless | 1x polished stainless
+- **Mould release**: none
+
+- **Temp - UP**: 170
+- **Temp - DOWN**: 170
+- **Heat**: Cold Start
+
+- **Duration-Melt**: 95 min
+- **Duration-Pre-Cool**: 20 min (heater off)
+- **Duration-Cooling-Final**: 8h
+
+- **Preparation**: 2x layers: 7cm, another 3cm after compressing
+- **Excess**: none
+- **Method**: Mould frame, 2 passes
+
+- **Die Material**: sanded stainless
+- **Die Penetration**: 10mm
+
+- **Thickness Error**: 1mm per 50cm
+- **Flatness Error**: 1mm per 50cm
+- **Final sheet thickness**: 30.0 mm
+- **Contraction / Shrinkage**: 10mm per 50cm
+- **Surface Quality**: good
+
+## Probing / Flatness Report (on CNC, straightened)
+