tests: from trash to gold :)

resources/material/hdpe/assets/readme.md

@@ -1,3 +1,4 @@
 ## Resources
 
 - [CAM - Tests - PM - 40-40-100](https://a360.co/4dotP6Q)
+

resources/material/hdpe/assets/washed-2-stage-3/readme.md

@@ -0,0 +1,23 @@
+## Settings
+
+- **Mould Size**: 43 x 35cm x 2cm
+- **Temp - UP**: 150
+- **Temp - DOWN**: 150
+- **Duration-Melt**: 50 min
+- **Duration-Pre-Cool**: 30 min (heating turned off, 1°C/min)
+- **Duration-Cooling-Final**: 3h
+- **Preparation**: 1x layer, 8cm
+- **Excess**: none
+- **Method**: Mould frame, 2 passes
+- **Mould sheets**: 1x sanded stainless | 1x polished stainless
+- **Mould height**: 20mm
+- **Mould release**: none
+- **Die Material**: sanded stainless
+- **Die Penetration**: 6mm
+- **Thickness Error**: 0.3mm per 50cm
+- **Flatness Error**: 1mm per 50cm
+- **Final sheet thickness**: 14mm
+- **Contraction / Shrinkage**: 8mm per 50cm
+- **Overall process**: clean and simple :)
+
+## Probing / Flatness Report (on CNC, straightened)

resources/material/hdpe/assets/washed-2-stage-4/readme.md

@@ -0,0 +1,24 @@
+## Settings
+
+- **Mould Size**: 43 x 35cm x 2cm
+- **Temp - UP**: 150
+- **Temp - DOWN**: 150
+- **Duration-Melt**: 60 min
+- **Duration-Pre-Cool**: 15 min (heating turned off, 130, 1°C/min)
+- **Duration-Cooling-Final**: 1.20h
+- **Preparation**: 1x layer, 10cm
+- **Excess**: none
+- **Method**: Mould frame, 2 passes
+- **Mould sheets**: 1x sanded stainless | 1x polished stainless
+- **Mould height**: 20mm
+- **Mould release**: none
+- **Die Material**: sanded stainless
+- **Die Penetration**: 7mm
+- **Thickness Error**: 1mm per 50cm
+- **Flatness Error**: 1mm per 50cm
+- **Final sheet thickness**: 13mm
+- **Contraction / Shrinkage**: 8mm per 50cm
+- **Overall process**: clean and simple :)
+
+## Probing / Flatness Report (on CNC, straightened)
+