# Saw Operator Cut Plan
## Board Dimensions: `500 x 500 mm`

## Specifications
* **V-Groove Spec:** Depth `5 mm`
* **Slot Spec:** Width `8 mm`, Depth `5 mm`

## Blade Setup
* **For V-Grooves:** Set saw blade angle to **45 degrees**.
* **For Slots:** Set saw blade angle to **0 degrees** (straight up).

## SETUP 1: VERTICAL CUTS
### 1. Reference from LEFT edge:
* Set fence to: `80 mm`  -- for **V-GROOVE**
### 2. Reference from RIGHT edge (FLIP board 180 deg):
* Set fence to: `80 mm`  -- for **V-GROOVE**

## SETUP 2: HORIZONTAL CUTS
### 1. Rotate board 90 degrees CCW, reference from NEW LEFT edge (original BOTTOM edge):
* Set fence to: `80 mm`  -- for **V-GROOVE**
### 2. Reference from NEW RIGHT edge (original TOP edge, FLIP board 180 deg):
* Set fence to: `80 mm`  -- for **V-GROOVE**

---
*End of Plan*