567 B
567 B
Drill Holes
Prepare a peg board for guides. I used "Design Board 30cm x 20cm (natural x white): 110 yen" from Daiso. The size of the holes is 5 mm and the hole spacing is 25 mm.
Stack the peg board on the plastic board and fix it with clamps to prevent it from moving. Aim at the center of the perforated board and drill guide holes 2 mm in diameter.
After the guide holes are drilled, remove the perforated board and fix only the plastic board to the workbench. Replace the drill with one of 5 mm diameter and drill the actual holes as per the guide holes.