1.0 KiB
1.0 KiB
Teensy Pinout:
These are the codes running on the Teensy that is located next to the Extruder-unit on the Z- axis:
Code_Teensy_Extruder.ino
- Main code running on the teensy, imports funcitons from the files below
- runs the main loop
Gameover.ino
- safety watchdog
I2C_Master.ino
- ?
PID_TemperatureControl
- controls the hotend temperature via PID
- controls the Hotend relays by calling Helper function from Relays.ino
Motoren.ino
- ?
Probe.ino
- BedLeveling Probe
PT100_MAX31865.ino
- Interfaces with MAX31865 boards and thermocouples for temperature reading
Relays.ino
- Helper funcitons of relays for heaters, cooling, and light
RGB_Led.ino
- RGB-LED as a visual status indication located on the PCB
RS485.ino
- Communication with the teensy located in the switch cabinet
Tastertureingabe.ino
- ?
TempWasser.ino
- control of water cooling temps
TM1637.ino
- 7 Segment displays located at the hotend
- these displays show hotend zone temps , water temps and other info